wickiewicked240z Posted May 17, 2008 Share Posted May 17, 2008 I have the DIY MSI kit with v3.0 board I just wanted to know if the codes/firmware already loaded on to the proccessor or do I have to load it in also what firmware is standard if its already loaded.Want to control fuel and spark/timing. Quote Link to comment Share on other sites More sharing options...
Noddle Posted May 17, 2008 Share Posted May 17, 2008 I have the DIY MSI kit with v3.0 board I just wanted to know if the codes/firmware already loaded on to the proccessor or do I have to load it in also what firmware is standard if its already loaded.Want to control fuel and spark/timing. I found this Note that the 68HC908 processors (for standard MegaSquirts and MSnS-E) already have the code loaded. Simply install MegaTune with all the default settings, and you should be ready to run. here http://www.megamanual.com/index.html it's about half way down Nigel Quote Link to comment Share on other sites More sharing options...
Matt Cramer Posted May 19, 2008 Share Posted May 19, 2008 The kit comes with B&G base code. For spark, you need to install MS1/Extra. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.