260chiles Posted September 6, 2008 Share Posted September 6, 2008 Hey guys, I've been having a problem with my clutch pedal. At times it feels very soft and it seems like it just sinks in and cannot engage the gears. Normally it runs fine with no problems but it's bugging me that I can't figure out the issue. The slave cylinder was replaced a couple years ago and there seems to be no oil leaks anywhere. The clutch master cylinder was also replaced a few months ago, so I don't know where the problem could be. If anyone has any suggestions I would love to hear them. Thanks guys Quote Link to comment Share on other sites More sharing options...
MJLamberson Posted September 6, 2008 Share Posted September 6, 2008 bleed the lines, and is the return spring on the pedal? Quote Link to comment Share on other sites More sharing options...
260chiles Posted September 6, 2008 Author Share Posted September 6, 2008 Return spring is in and I will bleed the lines again and see if I still have air in them. I did that about a month ago but will try it again. Quote Link to comment Share on other sites More sharing options...
MJLamberson Posted September 6, 2008 Share Posted September 6, 2008 maybe you just need a new clutch? Quote Link to comment Share on other sites More sharing options...
EMWHYR0HEN Posted September 6, 2008 Share Posted September 6, 2008 Try adjusting the throw at the master cylinder (or slave on some) just make sure there isn't any preload of the master pushrod. If you have to pump the clutch for it to engadge then you probably have a leak. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.