dizzle Posted March 16, 2009 Share Posted March 16, 2009 Trying to limit the amount of hot coolant running through the the intake man on my RB20det. Has anyone ever done this, and if so which ones can i eliminate? I am pretty sure that the one that runs across the top infront of the fuel rail can go. But the do I just loop the outlet at the heater hose to the one coming off of the thermostat housing? I know the lower water pipes run into the head so those have to stay. But my new turbo is not water cooled so I already took off the hard line and that y'ed into a bunch of stuff. Any help appricated... Quote Link to comment Share on other sites More sharing options...
Evan Purple240zt Posted March 16, 2009 Share Posted March 16, 2009 I don't recommend eliminating any lines, you may find it to be damn near impossible to bleed the air out.. its not too easy to begin with. The only lines I don't run are my lines for my t/b water and turbo water. They are both capped. Quote Link to comment Share on other sites More sharing options...
Canadianz Posted March 16, 2009 Share Posted March 16, 2009 I agree with Evan, The only ones you can do with out are the throttle body ones, and to your heater core. You could tidy them up though using different hoses not that it matters as you won't see the hoses anyway once the intake is on. Chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.