h4nsm0l3m4n Posted April 14, 2009 Share Posted April 14, 2009 I've installed tokico springs and illumina shocks in my car last year which lowered the car a little bit. I feel I would like to lower it a little bit more to fit the lower profile tires I'm getting. In the back I plan to swap out the thick shock isolators to the thin ones from the 240z but I'm out of luck on the front. I was hoping someone could offer a similar, simple, solution to lower the front of the car. One possible solution suggested to me was to run the "street camber kit" from MSA, but remove some of the bushing material to make it thinner, thus lowering the car. I would prefer to avoid cutting the springs, as I do not wish to loose any more suspension travel (modifications to the isolators will not cause a loss of suspension travel right?). I also do not wish to switch to coilovers, but rather find a simple, but effective solution using most of what I have now. Any one have any ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.