7MGFORCE Posted June 4, 2009 Share Posted June 4, 2009 I was originally going to use the drain plug as the feed but I can't figure out how I'm going to do that since the drain plug uses only 1/2 size bolt. So my next question is will the stock feed be enough? For a 300whp carb 302? Btw which is the fuel feed on the tank? I took it down a while back and forgot. This will go on a early 260z with 1/2 aluminum lines Quote Link to comment Share on other sites More sharing options...
JustChou Posted July 21, 2009 Share Posted July 21, 2009 Are you talking about the feed nipple? I am running 5/16" hose off of the nipple to the pump, then -6 from the pump to the rail. I was also running this setup with my carb and it ran fine. If you're running 1/2" hard line, you should be just fine at 300 whp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.