1badeagle Posted July 27, 2009 Share Posted July 27, 2009 I have a question about the vacuum line that comes off of the wastegate into a y that leads to the turbo and somewhere. When I installed my boost controller, I put it in line with the wastegate vacuum line and the one that goes to the turbo. I then capped the other one off. So my question is, is the other one important? Should i Have not capped it off? thanks Quote Link to comment Share on other sites More sharing options...
evan1242 Posted July 28, 2009 Share Posted July 28, 2009 it is fine to cap that one off. either of those two hoses are a great place to splice in the boost controller. it will help cut down spiking to a minimum. Quote Link to comment Share on other sites More sharing options...
1badeagle Posted July 28, 2009 Author Share Posted July 28, 2009 Ok, thats the reason I wanted to install it this way. But I wasnt sure and need to check. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.