zx_drift Posted August 10, 2009 Share Posted August 10, 2009 Does anybody know where the VCM (vacuum control modulator) is supposed to mount on a 280ZX/L28ET? Quote Link to comment Share on other sites More sharing options...
HowlerMonkey Posted August 10, 2009 Share Posted August 10, 2009 It bolts to a larger bracket that is about a foot long that has 4 holes (square pattern) that attaches the bracket to the car. It bends about 30 degrees near where it bolts to the car. The airflow meter is bolted to that bracket as well and sits on the opposite side of the bracket placing it slightly lower than the air flow meter and toward the center of the car. If you've done a non-turbo to turbo swap, your car will be missing the proper place for the that bracket to bolt but I believe it bolts either to the frame rail or low on the inner fender pretty close to it. Quote Link to comment Share on other sites More sharing options...
zx_drift Posted August 16, 2009 Author Share Posted August 16, 2009 have any pictures? any idea where I could find that bracket? Quote Link to comment Share on other sites More sharing options...
HowlerMonkey Posted August 17, 2009 Share Posted August 17, 2009 What you don't see is that the car has two points that push up into two rubber grommets at the bottom portion of the airflow meter bracket. This is the approximate configuration as installed in a the car. Quote Link to comment Share on other sites More sharing options...
zx_drift Posted October 6, 2009 Author Share Posted October 6, 2009 thanks for the picture. Does anyone have an extra? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.