rahail240 Posted August 30, 2009 Share Posted August 30, 2009 i'm after a decent rear disc conversion for my 240z 73. not after the 280z or 240sx kit though. also a long shot but this style valve cover as well. thanks in advance. Quote Link to comment Share on other sites More sharing options...
greenmonster80 Posted September 2, 2009 Share Posted September 2, 2009 Good luck. The valve covers sell around the $600 plus mark. Quote Link to comment Share on other sites More sharing options...
fastzcars Posted September 2, 2009 Share Posted September 2, 2009 Are you looking for the wilwood 2 piston style kit? I have the bracket and the disc, all you need is th caliper and the hose, and you can get that from summit racing. Quote Link to comment Share on other sites More sharing options...
rahail240 Posted September 2, 2009 Author Share Posted September 2, 2009 i know. i missed out on the one kameari were selling on e bay for 475 usd. it was from there shop display. Quote Link to comment Share on other sites More sharing options...
Mario Posted September 3, 2009 Share Posted September 3, 2009 If interested I have the valve cove from a 71 that reads NISSAN 2400 OHC Mcamps228@aol.com Quote Link to comment Share on other sites More sharing options...
Guest NicBucholz Posted September 11, 2009 Share Posted September 11, 2009 I have a set of caliper mounts I was going to use to make copies from. I pulled them from a Datsun Maxima. They bolt onto the hub and use a '79 280ZX Caliper and Rotor. Not sure what I would sell the brakets for, I figure $100 a pair plus shipping. Still need to contact my buddy (the fabricator) and find out his cost to make them. I used this setup on my last '77 280Z and will be doing it again on my '71 240Z. Along with the toyo 4-pots and 300ZX vented fronts and don't forget the 15/16 Master :0) It makes a really big difference in braking. Good luck. ~Nic Quote Link to comment Share on other sites More sharing options...
rahail240 Posted September 12, 2009 Author Share Posted September 12, 2009 hey nic. already have the big brake silverline motors set up on the fronts with the bigger master cylinder. i've heard there are better set ups than the 280z for the rear though. cheers Quote Link to comment Share on other sites More sharing options...
Guest NicBucholz Posted September 19, 2009 Share Posted September 19, 2009 No worries... I just picked up a set of used calipers and rotors for $100. The brackets I have are for the '82 280ZX which will bolt to the 240Z hub. I guess no-one is really looking for this type of upgrade so I will not push to have a copy made. I'm just happy I can get the Toyo 4-pot and cermic pads for $120 brand new ~N Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.