harzard,head lights,and turn signal problem

[Kevlars30z]

so as you can see by the title i have harzard, head lights and turn signal problem. first my harzard lights. all four lights work when i turn on the hazard switch but only one signal in the dash flashes? i cant find anything wrong and it worked once more but then it stopped working again. second, my head lights it keeps on blowing a fuse. i check the switch and nothing it works. then my turn signals dont work at all the bulbs are good but when i switch it to the left or right it does not blink in the dash and the lights dont flash at all. so im super confused and not the best in electrical problems; what can be the problem?

thanks,

kevin

[MONGO510]

Check for pinched, burned/melted wiring harness in the wiring that goes to the lights that are on the front of the car. I say the front because headlite wiring only goes forward, whereas Hazard and turn lights go fore and aft. Pinched harness could cause all problems

[Kevlars30z]

sweet well do thanks

[ZR8ED]

By your title, do you have a 280? If so, have good look at your hazard switch/wiring as well. It can affect your marker/signal/brake lights. If you unplug the switch, you will see what I mean.

[Kevlars30z]

By your title, do you have a 280? If so, have good look at your hazard switch/wiring as well. It can affect your marker/signal/brake lights. If you unplug the switch, you will see what I mean.

nope i have a 1972 240z and the previous owner gave me two hazard switches i put the good one on but ill see what happens if i put the other one on. never know i probably mixed them up