Request for NA w '81zxt Ign. MSII Settings

[evil_datto]

Hi guys, I've purchased the stuff and so now I'm looking for settings to start with once I get it all wired up.

The car is as follows:

 

MSII 3.0

'80zx N/A

Highish compression 10-11:1+

Stock cam (for now)

'81zxt ignition components (Power transistor & Crank Angle Sensor on crank pulley)

Adjustable FPR

Headers

2 1/4" exhaust

No O2 sensor for now. I have the sensor, but unable to get to the exhaust shop to get a bung welded on the headers for it at the moment.

 

I've looked through the Map sharing thread but didn't find any N/A's that fit my situation very well.

Also didn't see anyone running MSII with the '81zxt CAS & Power Transistor so I don't know what settings to use to run them. Hoping someone can send me their file so I can grab those ignition settings.

 

For the timing map, I can't use anyone's N/A maps because they will be running vac/mech advance, right? And the people with CAS are running timing for turbo.

 

Fuel map just a normal map I guess? Nothing special on the fuel delivery side, just stock N/A 180cc Injectors.

 

Please share any information you think might help me with my setup.

Thanks, Scott.

[evil_datto]

Requesting again for any setups that are close to mine, I don't mind having to tweak on an existing setting file.

Or if someone can point me to some existing setups I might have missed.

 

To make it simple,

I basically only need full settings for a near stock N/A with spark.. But can't find anyone using spark on N/A.

For the spark I need the ignition settings to suit 81zxt components

 

I'm using 2.89 code on MSII 3.0

 

Thanks, Scott

[FlatBlack]

Hey, this is the thread we have here for Z MS tunes:

 

http://forums.hybridz.org/showthread.php?t=99689&highlight=Map+sharing&page=2

 

Read all the way through that, and while you're at it, check out the MegaSquirt forums. http://forums.hybridz.org/forumdisplay.php?f=88

 

Anyways, ZManco is running MSII Extra on a N/A L28 using the ZXT CAS Dizzy, here are his maps:

 

http://forums.hybridz.org/showpost.php?p=930907&postcount=30

 

You can extrapolate the data and suit it to your needs if things aren't 100% like yours, this will just get you started and you can tune out the rest.

[evil_datto]

Cheers, saved his maps and someone elses maps. Should be able to cobble something together now.

Now I just want to make sure the pulley mounted CAS is the same as the Dizzy CAS?

[mobythevan]

In the installation sticky there is a section from Tony D. that describes more details about the crank mounted CAS vs the Dizzy CAS for turbo cars. Let me know if you don't see it, sometimes things are buried a bit.

[evil_datto]

Yeah thanks moby, I've read through that and I bought a spare CAS signal plate to modify up.

But the part I'm unsure on is the wheel type settings to use in the Ignition settings page here:

 

Thanks