Jump to content
HybridZ

Missing the plug for my 83 turbo dizzy, trying to figure out what prong is what.


LamboZ

Recommended Posts

I'm missing my plug for my turbo dizzy and I need to wire it up to my MSnS.

Now there's 4 prongs and I know I gotta use all but one but I'm stumped on what one is what. I searched and there's no answer that helps me on this.

Most pictures I see aren't very clear either.

Any help would be great.

Link to comment
Share on other sites

It's also in one of the stickys in the megasquirt forum.

 

It's in this one

 

http://forums.hybridz.org/showthread.php?t=88246

 

but there was only a verbal description which was a bit confusing to me.

 

DIZZY WIRE COLORS!!!

if you use the wire at the dizzy' date=' versus after the 4 pin round connector:

 

Dizzy side ------------ Harness Side

Red (12v) B/W

White (MS trigger) G/B

Green (not used) G/Y

Black (gnd) Black

 

In case your wires are unplugged from the base of the dizzy, here is some info from Mack:

if i hold the dist in my hand, with the rotor pointing away from me and the plug facing up, the green wire is above the white wire on the left and the red wire is above the black on the right. [/b']
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...