John Scott Posted February 11, 2003 Share Posted February 11, 2003 Whassup with my gauge? Only reads 1/2 or less, regardless of full tank since I reinstalled it. Never messed with the inside. Quote Link to comment Share on other sites More sharing options...
Mike kZ Posted February 14, 2003 Share Posted February 14, 2003 Sounds like your sender took a dump. Take it out and check it with an ohm meter, it should read between 12, and 80 ohms. It may be just stuck in one position. Quote Link to comment Share on other sites More sharing options...
jeromio Posted February 14, 2003 Share Posted February 14, 2003 Mine used to read full to half, then it would stick there. I had to remember to tap it - it was the actual guge that was at fault. Musta had gunk in or something. Anyway, at some point, I guess I tapped too hard and the plastic lens came loose. Oops. Quote Link to comment Share on other sites More sharing options...
660Z Posted February 18, 2003 Share Posted February 18, 2003 take it apart there should be a set of contact points in there that might need cleaned....mine needed them cleaned but my gauge didnt work at all....mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.