ultimatepoghero Posted March 4, 2010 Share Posted March 4, 2010 Hey can anyone show me where each color wire goes into the 2 harnesses for the power supply for the digital dash. Mine is damaged and I can make a new one but i need to know which color wires go where, I can't tell from what I have left and the electrical diagrams in the FSM doesn't have the color codes to the harness. It would suck to have to get a whole new digital dash just because the harness that comes off of it going to the power unit is smashed. I have some old computer parts and connectors for the power buttons and such to the Motherboard fit nice and snug on the dash power units' pins. At the very least if someone could just take some nice pictures of their harness, showing me all the colors, that would be sufficient. I don't know if the wire color scheme differentiated over the years but I have an 84' 300zxT thanks Quote Link to comment Share on other sites More sharing options...
gat1954 Posted March 9, 2010 Share Posted March 9, 2010 I have done it,,, and mapped the wires.. You ahve to amke sure it's perfect,, Some models had a slight variance ... I hadthe same problem with my 86 Turbo, and Im going to pull the dash out, and rework it,, perfect.. THE problem occurs because of the steel, in the Dah foces a severe Crimp and right angle going into the powere supply write me first at jcesp at hot Garry T Del Mar Ca Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.