mota z Posted July 28, 2010 Share Posted July 28, 2010 Whats up guys a few weeks ago my temp gauge wasn't working. At first I thought I just had a bad connection so I cleaned all the plugs but still no luck. So them after I went ahead and check the water temp sensor and found this the loose cable seem to becoming from what I believe is the water temp switch but im not sure. If you look closely you will see 2 small green spots were looks like cables were coming out of. I was over on zcar.com and I came across this thread but on the pics I didn't see that screw that I have the arrow pointing at. http://www.zcar.com/forums/702926/280z-question-newb Quote Link to comment Share on other sites More sharing options...
theguppies Posted July 28, 2010 Share Posted July 28, 2010 (edited) second picture with white arrow pointing is the water temp sensor. since there is no information about your car, i assume you have a 75 280z. I had this problem before. took me a while to find that switch. good luck here is my picture Edited July 28, 2010 by theguppies Quote Link to comment Share on other sites More sharing options...
theguppies Posted July 28, 2010 Share Posted July 28, 2010 second picture with white arrow pointing is the water temp sensor. since there is no information about your car, i assume you have a 75 280z. I had this problem before. took me a while to find that switch. good luck here is my picture one wire is ground and one wire is connected to the lose wire in your first picture Quote Link to comment Share on other sites More sharing options...
mota z Posted July 29, 2010 Author Share Posted July 29, 2010 ok cool thanx. Yeah mine is a 76 forgot to add that to it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.