96 Nissan Maxima auto air in my 280zx

[NewZMan]

I have searched and searched with no success. Either it hasn't been done, or there just isn't a write-up for it but I have installed the complete system from a 96 Nissan Maxima into my 280ZX. My problem is with the wiring. It should be pretty straight forward, but apparently I am missing something. I have the auto amp., which is a small computer that goes with the system and I grabbed the ECU from the donor car. Wired it up as per the FSM and nothing. The display will not come on no matter what I do. I even have three extra display units and none will power up.

 

If someone else has accomplished this could you offer a little insight for my project? It's driving me crazy cause I know it has to be something simple. Thanks in advance!

[NewZMan]

I have searched and searched with no success. Either it hasn't been done, or there just isn't a write-up for it but I have installed the complete system from a 96 Nissan Maxima into my 280ZX. My problem is with the wiring. It should be pretty straight forward, but apparently I am missing something. I have the auto amp., which is a small computer that goes with the system and I grabbed the ECU from the donor car. Wired it up as per the FSM and nothing. The display will not come on no matter what I do. I even have three extra display units and none will power up.

 

If someone else has accomplished this could you offer a little insight for my project? It's driving me crazy cause I know it has to be something simple. Thanks in advance!

 

 

Nobody???

[Bankai Dan]

NewZMan

I don't know if this will help or not,

 

http://www.nissanclub.com/forums/general-nissan-altima-discussion-1993-2001/216498-howto-manual-automatic-digital-climate-control-conversion.html

http://www.chuonthis.com/cars/s14-dcc/

 

Good luck.

Dan