Meph Posted September 13, 2010 Share Posted September 13, 2010 (edited) Hey guys, Diving into another unknown area of suspension, my TC rods. The shell came with Techno Toy TC's installed and I have never put much thought into adjusting them till now. For a general starting point, is it a correct to start with each rod at equal length? and would anyone happen to have a picture roughly showing the amount of threads you would start with? On a side note, what does adjusting the caster/tc rods actuallydo when your driving? thanks! Edited September 13, 2010 by Meph Quote Link to comment Share on other sites More sharing options...
30 ounce Posted September 13, 2010 Share Posted September 13, 2010 It looks like I have about 15 threads exposed. The Tc rods control the amount of caster wich controls the ability to return to center and initial turn in. I have mine set at 3.3 degrees. Any more and I would contact the lower front body panel. If you are able to get more do so. John C has a recomendation on suspension settings sticky. Don't just adjust it on your own...take it to a shop that can do accurately. If you change them it will change everything else like toe, camber, etc. Also they should be exactly the sames settings. It made a huge improvement in front end bite for me. Quote Link to comment Share on other sites More sharing options...
Meph Posted September 13, 2010 Author Share Posted September 13, 2010 (edited) Thanks, I want to set my toe as well and I figured the TC would have an effect so I decided to adjsut it first. Edited September 13, 2010 by Meph Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.