flyboy2 Posted October 24, 2010 Share Posted October 24, 2010 What did you guys do with the fuel vent line that runs to the engine bay? Just leave it open, remove it and seal it at the tank? I am ready to install a LY6, but I want to take care of this line before the engine goes in. Thanks Quote Link to comment Share on other sites More sharing options...
Cable Posted November 13, 2010 Share Posted November 13, 2010 I remove all factory fuel lines and re-plumb with 3/8" feed and 5/16" return (if needed). Quote Link to comment Share on other sites More sharing options...
flyboy2 Posted November 14, 2010 Author Share Posted November 14, 2010 Thank you for your reply Cable, What I ended up doing was to remove the fuel supply and return lines and used a 3/8 supply. The vent line was re bent and run to the front of the right frame rail. I can either install a charcoal canister ot just put a small filter on it to keep stuff from plugging the tube. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.