Donnavin Posted February 14, 2011 Share Posted February 14, 2011 I have a RB25DET Motor fully built with a GT45R Turbo. I have been asking all over for help with the clutch, Z1 Motorsport told me to use the N/A clutch and flywheel, other people told me to use the RB flywheel and pressure plate with the Z32 clutch disk. I want to know from somebody with experience which 1 to get cause I do not want to buy twice. I will appreciate it. Thanks Quote Link to comment Share on other sites More sharing options...
Evan Purple240zt Posted February 14, 2011 Share Posted February 14, 2011 You can't use a z32 flywheel on an RB (wrong bolt pattern). You can use the z32 N/A clutch on the RB flywheel though. Welcome to the site. Quote Link to comment Share on other sites More sharing options...
Donnavin Posted February 14, 2011 Author Share Posted February 14, 2011 Thanks for welcoming to the site. So i should use the RB flywheel with the N/A clutch and RB pressure plate ? Quote Link to comment Share on other sites More sharing options...
Donnavin Posted February 14, 2011 Author Share Posted February 14, 2011 What type of clutch would u recommend for me to use ? Quote Link to comment Share on other sites More sharing options...
Evan Purple240zt Posted February 22, 2011 Share Posted February 22, 2011 Use a z32 n/a clutch disk, pressure plate and throwout bearing. Pilot bearing too. choose a clutch that will satisfy your HP levels. My next clutch will likely be from southbend clutch. Quote Link to comment Share on other sites More sharing options...
Donnavin Posted February 28, 2011 Author Share Posted February 28, 2011 I bought the RB25 10lb flywheel and pressure plate and using a Nismo 6 poke clutch disk, we'll see if it works or not. Thanks for the info guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.