jakeoster Posted February 15, 2011 Share Posted February 15, 2011 (edited) Ok guys this is a kind of off the wall question; but can the clutch hard line running from the master to the slave cylinder flex line from a 75' 280z be swapped to a 72' 240z without issue? When doing my engine swap I stripped the line on my 240z and it is basically useless now so it needs to be replaced. However, my 280z line has not been stripped. I would go check it myself but my 280z is not very easy to get to at the moment and I was wondering if anyone could save me the trouble. Thanks in advance. Edited February 15, 2011 by jakeoster Quote Link to comment Share on other sites More sharing options...
jakeoster Posted February 16, 2011 Author Share Posted February 16, 2011 Ah well, worth a shot. I'll just have to go take a look for myself when I get a little time. I'll report what my findings. Quote Link to comment Share on other sites More sharing options...
jakeoster Posted February 19, 2011 Author Share Posted February 19, 2011 Checked it, it's a little diffferent but it should work out ok. Quote Link to comment Share on other sites More sharing options...
stravi757 Posted February 19, 2011 Share Posted February 19, 2011 Sorry I didn't see this earlier, I have a 240z sitting right next to my 280z(like there are literally both parked next to each other lol) If you still are unsure I can double check for you tomorrow if you need. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.