Drawing Files, Templates
8 files
-
280z header shims
By pheelep
header shims dxf files. Might require some adjustment or filing down excess of metal, but was fully tested on vehicle.
4 downloads
Submitted
-
Submitted
-
Header flange dimensions
By SuperDan
This is a solid model of a header flange for a P90 head.
The file formats are STEP, and IGES. I can post in other formats if you would like, just PM me and I will save my file in
something you can use.
Also attached are some solid models for a header design. This isn't the one that I went with, but it still looks pretty
cool. Note that the flange is attached upside down and uses the wrong bolt pattern for the middle flange (my mistake). Use
the flange only file for flange dimensions.
Contributed by:zguy36
152 downloads
Submitted
-
3D BMW 5 series center vent adapter
By SuperDan
This is the adapter I used in this thread
http://forums.hybridz.org/index.php?showtopic=81658
Contributed by: Derek
12 downloads
Submitted
-
Ground Control Camber Plate template
By SuperDan
Ground Control Camber Plate template as drawn and designed by Zzeal in his original thread here: http://forums.hybrid...ad.php?t=152601
I scanned in a copy of the template to .pdf format. I taped it to a standard 8 1/2 x 11 piece of paper and fed it through my nice top-feed scanner at work so that it wouldn't reduce or enlarge the size at all.
I confirmed that the size doesn't change by printing it from Adobe Acrobat, you just want to make sure after clicking print that in the "page handling" section of the print window that under "page scaling" to select "none" and uncheck "auto-rotate and center" and it prints out perfectly 1-1 to the original template made by Zzeal.
One more tip, you'll probably want to print it on the thickest paper your printer can handle so that when you cut it out it isn't super flimsy like it will be if you just use regular printer paper.
Contributed by: junglist
125 downloads
Submitted
-
Turbo Swap Wiring Diagram
By SuperDan
Since I just finished a swap, I decided to document what I wired, and how. I was going to sell it on ebay but decided not to waste my time...lol. This is for wiring an 82-83 into a 75-78 as far as I can figure. Year models may vary so check your manual and wiring diagrams!!!!! I'M NOT LIABLE FOR DEATH AND DESTRUCTION. unless I choose to take credit.
Option: You may omit the ZXT Fuel Pump Control Module by simply grounding the negative side of the fuel pump.
Contributed by: cygnusx1
162 downloads
Submitted
-
CV Adapter Print
By SuperDan
ADAPTERS FOR 280ZX TURBO CV Shafts onto 280Z STUB AXLES & INNER FLANGES
MAY WORK WITH 240Z INNER FLANGES TOO - CHECK DIMENSIONS!
Contributed by cygnusx1
384 downloads
Submitted
-
Ron Tyler diff mount in google sketchup
By SuperDan
Ron Tyler style diff mount in google sketchup
135 downloads
Submitted