moerex

Yeah, I know they are different. I'm planning on shaving the rear bumper. I'll be welding up the bumper recesses. I like a smooth rear-end. Thanks though.

yeah that's right. i need the sheet metal. Anyone close to Alabama have one. Maybe a parts car i could cut it off of. Any help would be greatly a appreciated.

I need a a quarter panel for 70-78 does not matter. need from the roof to the rocker and from the door to the tail lights. the whole panel. thanks

thanks bjhines. i'm running through several ideas. including making an inspection lid in the trunk area or some how fabbing a filler neck to the original location. we will see.

thanks alot.

Hi all, I just got a 16gal fuel cell to replace my rusted leaky old tank. please give me a hand and post some pictures of your mounting locations and mods. Thanks a lot.

I cut them loose with a chisel. Cleaned them up and welded them back. I had a lot of rust around mine though. It was not a big deal on mine.

Where did you buy the turbo? If you don't mind my asking.

Dude it sound good.

thanks. alot

what injectors, FPR, and Fuel pressure are you using. I have MSII and running way to rich on 42lb bocsh injectors. The car sounds great! more videos Please.

man your car is awesome.

Z-ya, have you tested a bocsh 42lb injector?

I got it to start and idle. The problem was it my wiring for my PIP and my SAW. I replaced them with a sheilded cable i got from work and it fired right up. Thanks for all you help.

kicks ass. even.

Could I pull the signal up with a resister? Thanks alot. DIY kick ass.

I checked the PIP line with my multimeter. If i used it right, the signal is not reaching 1 Volt. Isn't is supposted to be 12 Volts. I checkes the wiring for shorts, all looks ok. any ideas Thanks

ok thanks.

i did not build it. I got it from DIYautotune and That said it would run edis out of the box. Now on my end of things. the software is set like the mega manual says for edis.. thanks

forgot. yes, i have a coolant temp. tps. all the other stuff. only the tach is not working tach. any ideas.

no. have no tach signal in mt. thanks

No. I don't have a timing light. How do I do this? Thanks.

Pete, Sorry to keep bothering you. I fill pretty stupid right now. My ms is not a msns its a ms2. running the 2.687 code. Still not able to crank the car. It's a fresh rebuild. I have T3/T04e, Pallnet fuel rail, 42lb injectors, Walbro 225 fuel pump, and the stock fuel pressure regulator. The VR sensor is right on the 6th tooth following the missing tooth and make I have a bright blue spake. The timming is right. I can't get it to fire at all. I've done everything I can thing of. Thanks

I'm trying to make edis work on a msns-e 2.687. I got spark now. Thanks Pete and Clifton. Now I'm not getting a signal for the tach in MT. Anybody have any ideas? Thanks.

I GOT IT!!!!! new sheilded cable and some repositioning of the vr sensor and vawla. Thank you all for your help. todd