Jump to content
HybridZ

Darkone

Members
 View Profile  See their activity

  • Posts

    42

  • Joined

  • Last visited

 Content Type 

Everything posted by Darkone

  1. Darkone
    hadent pulled the stock volt gauge yet doing som set up befor fabing dash
  2. Darkone
    here are a few pics of the z nearing compleation hope you like. some show the ecm placement as well as the tune port wiring run through the factory wiring hole along with intake hose design and dash set up
  3. Darkone
    ha ha thats good till i just read it i didnt even relize i made a mistake i ment to say instead of using a "intank" pump on your injected z the ford one from the bronco is external and will supply at max 100psi at 220lph and with a little modding of the stock fuelpump mount on the z it fits real nicely. sorry about the mixup.
  4. Darkone
    any of you guys that dont want to run an intake fuel pump i came up with a simple solution i used a fuelpump out of a 90-96 injected v8 bronco it is external and is easy to mount in the stock location with little mods.
  5. Darkone
    before installing the mass we tested the length of the tubing on a tpi installed t bucket and it worked out very well. we found no loss in acceleration or throttel response.
  6. Darkone
    the mass air flow sensor will be located in front of the radiator along with a KnN cone air fillter oh ya the tubing is 3in id and what you see there cost me 15$ for the tubing 90s and the boots
  7. Darkone
    just finished the 1st section of intake tube. what do you guys think.
  8. Darkone
    dos anybody know how much you have to machine off the t5 bearing retainer to mount a gm hydrolic slave cyclender from a 96 camaro 5 speed on it?
  9. Darkone
    what would you think about wrx blue on a z or maybe a timberline green
  10. Darkone
    hay bartman the reason i was wondering is becuse i would like to make some emblems that say DATSUN SMALLBLOCK Z Or DATSUN 5.7L Z Or DATSUN LS1 Z You know just somthing different i figured that the v8 guys would have a little idea of something different i mean you know anyone who puts a v8 in a z is LOOKING for somthing different
  11. Darkone
    ya iv got a friend that has a cnc machine (a very small machine) and i was going to have some emblems made any help would be cool
  12. Darkone
    Dose anybody know what font the datsun emblem on the back of the 280z cars is?
  13. Darkone
    Found the right flywheel at autozone Part#6527 for 59.99 + 145.00 core charge its the 153 type for a 86 camaro and weighs 15lbs
  14. Darkone
    im doing a v8 swap in my 77 280 and the moter i am using is a Tune port injected 350 and a t5 trans but im having a problem finding a flywheel i think i need the 152 toothed one but cant figure out what vehicals these came in this is a car bellhousing so i guess i need the small flywheel any help would be apreciated.
  15. Darkone
    my car has a tune port 350 with a borg warner t50 hit 135 in 5th then the drive shaft blew through the floor of the car now its in the shop geting the floor hamered out and then steel plated but still hit 135
  16. Darkone
    my friend hooked me up with this web site its a national parts locater for most wrecking yards and can find almost anypart for any car. They helped me find my LS1 the web site is car-part.com hope this helps people out with parts.
  17. Darkone
    I have a 76 280z and am going to put a LS1+t5 combo with block hugger headers in it via the jtr kit and was wondering if any one has run 2 1/2inch or 3inch straight pipes with this set up and how it sounds
×
×
  • Create New...