Matadem
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Matadem
-
-
If you're looking for turbo and carb info www.theturboforums.com
seems to me the clifford intake should work better than the Az
but I am not sure
drawthru carb setups works too
check this pic 4 cil datsun drawthu setup (the mustang runs 10's)
-
comming from a little island
l28 stroker datsun 4bbl
http://videos.streetfire.net/video/Arubas-IHRA-world-Ras_184819.htm
sub champion in summit series no box
IHRA World Finals Results
ROCKINGHAM, N.C. -- Sunday's final results from the World Finals presented by CapeFearWheels.com at Rockingham Dragway. The race is the 11th of 10 in the 2008 Knoll-Gas Nitro Jam Drag Racing Series:
Top Fuel -- Tim Boychuk, 4.853 seconds, 273.05 mph def. Mike Strasburg, 7.650 seconds, 103.18 mph.
Nitro Funny Car -- John Lawson, Chevy Impala, 12.857, 62.69 def. Jack Wyatt, Dodge Stratus, broke.
Pro Modified -- Scott Cannon, Pontiac Firebird, 5.979, 238.01 def . Burton Auxier, Chevy Camaro, 10.697, 102.79 .
Alcohol Funny Car -- Laurie Cannister, Chevy Camaro, 5.856, 242.23 def . Thomas Carter, Chevy Monte Carlo, 6.556, 155.27 .
Pro Stock -- John Montecalvo, Chevy Cobalt, 6.317, 221.27 def. Elijah Morton, Ford Mustang, 6.337, 218.87.
Summit SuperSeries No Box -- Chad Dotson, Chevy Nova, 10.675, 113.99 def. Jean-Carlo Ras, Datsun B210, 12.105, 108.90.
Summit SuperSeries Box -- Darrell Pittman, Chevy Camaro, 10.367, 125.46 def. Don Kiekel, dragster, 8.164, 160.04.
-
Someone correct me if I am wrong
this would be the same as using a turbo distributor (the one with the disc inside)????
as a trigger
-
There are 3 NAPA stores.
Easier said than done... most of the time they don't have it and when they do I better order it myself as the prices are about 4x more expensive
I went to napa to get a voltage regulator for my 69 Plymouth and they told me it was $73
I found it to be too expensive and went to another parts store and guess what $16 that was 5 years ago
I guess I can wait ... next month I'll be in Vegas
-
Where I can buy fel pro head gasket and complete gaskets set
for l28
We need the intake/exhaust gasket to finish the head
Thanks
-
A friend of mine runs 11's and 10's with nitrous on l28 stroker engine
with fellpro gasket no problems
another one built a backyard high compression engine kept blowing gaskets
got a metal head gasket guess what broke the piston
we've blown gaskets at 10 psi of boost due to detonation...
-
Not a 4bbl but close and very nice
-
i've herd a lot of negative things about blow through systems. plus i don't think you can have a stock holley, edelbrock, or any carb at that being used in a blow through system. if it were so easy and drivable you would see a lot of people doing it.
i use to have a four barrle conversion on my l26 and it did about 15 miles per gallon average. i don't even want to think how bad it would be if i had a turbo in addition to that humungus 4 barrel carburetor.
if any one is thinking about doing anything with a turbo you should first read my favorite book: maximum boost.
just my two cents
probably you guys haven't visited www.turbomustangs.com
lots and lots of carb blowthru setup and information
some rides with 1000+ hp
-
take a look at this car red datsun stroker engine
runs 11 na and 10's with nitrous
I don't think he spend 10 grand
I got a few pics of the engine somewhere....
-
for that kind of money you could 2 rb26 engines lol
-
One thing I don't care about streetability this won't be a daily
will be driven to the track and very limited street use
the car isn't a z but a bluebird 2 door stripped that going to be painted flat black with weld rims mad max style
Thanks for the suggestions.
-
The only question I ask here in my post is regarding the cr
I think the holset turbo I have is enough for that goal
as well as the head... including the fuel pump and regulator that I have
so even with forged pistons arp fasteners on rods, mains ,head
and balanced bottom end it is unrealistic
it was 400hp not 1400hp
sure it can blow up everything is a possibility
funny thing how a friend of mine can have near 300rwhp out of a bone stock 1.8l engine just by changing to microtech ems, ic , turbo etc...
notice the brand of the ic
btw he's in the 11's now
http://www.dragtimes.com/Mitsubishi-Lancer-Timeslip-10722.html
-
Since the F54 block I have has some grooves/ scratches
in it the machine shop recommended to go OS 0.030
So I contacted brc pistons they told me to go 8.0 to 1 or 8.3 to 1 CR
What is your opinion on cr regarding a turbo motor
Since I spend allot of money into the head and now for pistons might as well shoot for 400hp
I have shaved the head (p90) 0.005 just to be sure it is perfect and I also want to do it to the block...
I do have an intercooler and I am going also with water/meth injection
I also asked them for lighweight the pistons....
any opinions/ suggestions/ recomendations?
Thanks
-
I am doing a blow thru setup on my 260z. I plan on going with the holley style carb setup to make running this setup easier. I also will be using a turbo prepped Demon 650cfm carb, so fuel isnt a problem. I was wondering what turbo i should use. I want it to mount up as easy as possible. Spooling isnt an issue, i'd prefer 3000 rpm range for spool not peak boost. let me know what you guys think.
Have you considered csu carbs? that's what most use with blowthru and having great succes with
I am going blowthru also but with a homebuilt edelbrock
I am going to use a holset hy35 turbo...
hoping for 300+ hp when finished
-
-
What would you prefer?
I can get both I am thinking that with an auto I might be more consistent at the track.... How strong are the l28 turbo auto transmission
can I get parts for it?...High stall converter , transmission kit/shift kit etc
With the megasquirt antilag option I can probably launch at full boost
I am hoping for high 12's (hope) stripped datsun bluebird way lighter than a zx.... Holset hy35 turbo
my head should be finished tomorrow ported and polished
I was talking to a guy right now he has a 280zx with an rb25det engine he had a l28 with weber carbs, cam, headers with auto and 75 shot nitrous ran 13.4's full interior
any suggestions????
-
and I just finished my ms1 v3 and they come out with this
Bowling and Grippo are soon (early 2008) going to offer a sequential MicroSquirt, called "MS-II Sequencer". The reason for doing this is that we have the infrastructure now for MicroSquirt, all of the parts, harnesses, case, etc. And we have many users looking for sequential injection or coil-on-plug control (or both). As a result, it made sense to extend MicroSquirt to generate sequential functionality (fuel injection timed to ignition order, and cylinder-by-cylinder injection and ignition tuning).
-
Unless you are going wet turbos, blowthrough cannot go over around 12 psi from my research. Over that and you will crush the float bowls. High boost equals EFI.
you can go with a 4bbl also
replace those brass floats with nitrophyl floats
you can go up to 20 psi or even more
here is some good reading http://www.studebakerdriversclub.com/documents/ChickenHawkArticle.pdf
there is a lot of info on turbomustangs.com on blowthru setups
take a look at this 20+ psi 10.95et
http://memimage.cardomain.net/member_images/2/web/686000-686999/686815_13_full.jpg
if possible on these there is no reason it can't be done on a l28
-
Are you trying to machine a dish into the flat tops, or machine the dish out of the dish pistons, just for curiosity's sake?
Machine a dish into the flattops
-
If it was me I would run an intake and a 4bbl >> edelbrock
-
I had this problem but with another type of car went thru allot of gaskets....the problem was that the manifold was bend...
-
to lower compression?
I have 2 l28 blocks 1 from a z 1 from a patrol
the patrol has dished pistons(use thicker rings too)(this is what I am going to use) the z has flattop I was wondering If I machined the top of the pistons to lower compression a bit I would have a spare set
I would use these with p90a head... p90a stamped but has no hydraulic lifters...
You can laugh if you want but this is my junkyard technology project
the only performance parts are a professional ported head and arp conrod bolts...+ the turbo stuff
Thanks
-
Anyone is using a l28 non turbo distributor with MS direct coil control with no problems? 6000's rpm???
I do have also have a ms6al also but it's for my other car
Thanks
-
My MS1 v3.0 should be here tomorrow
I've been reading and searching everything I need for this project
what are the pro's and con's of a car with MS installed with tps only or map only or map and tps?
in a turbocharged aplication?
Thanks
Anyone have experience with 4 Bbl Holley with Turbo?
in Nissan L6 Forum
Posted
My project car will be blowthru carb with megasquirt controlling timing
Those turbo dist are hard to find and expensive to replace I will be using the na dist locked
Take a look at this monster this guy claims to have about 800hp
it sure looks like star trek meets old school lol on a 6 cylinder engine
http://img401.imageshack.us/my.php?image=800jn0.jpg
even those old slant 6 engines runs 11's now on carbs/turbo