Jump to content
HybridZ

Matadem

Members
  • Posts

    24
  • Joined

  • Last visited

About Matadem

  • Birthday 08/08/1977

Matadem's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. My project car will be blowthru carb with megasquirt controlling timing Those turbo dist are hard to find and expensive to replace I will be using the na dist locked Take a look at this monster this guy claims to have about 800hp it sure looks like star trek meets old school lol on a 6 cylinder engine http://img401.imageshack.us/my.php?image=800jn0.jpg even those old slant 6 engines runs 11's now on carbs/turbo
  2. If you're looking for turbo and carb info www.theturboforums.com seems to me the clifford intake should work better than the Az but I am not sure drawthru carb setups works too check this pic 4 cil datsun drawthu setup (the mustang runs 10's)
  3. comming from a little island l28 stroker datsun 4bbl http://videos.streetfire.net/video/Arubas-IHRA-world-Ras_184819.htm sub champion in summit series no box IHRA World Finals Results ROCKINGHAM, N.C. -- Sunday's final results from the World Finals presented by CapeFearWheels.com at Rockingham Dragway. The race is the 11th of 10 in the 2008 Knoll-Gas Nitro Jam Drag Racing Series: Top Fuel -- Tim Boychuk, 4.853 seconds, 273.05 mph def. Mike Strasburg, 7.650 seconds, 103.18 mph. Nitro Funny Car -- John Lawson, Chevy Impala, 12.857, 62.69 def. Jack Wyatt, Dodge Stratus, broke. Pro Modified -- Scott Cannon, Pontiac Firebird, 5.979, 238.01 def . Burton Auxier, Chevy Camaro, 10.697, 102.79 . Alcohol Funny Car -- Laurie Cannister, Chevy Camaro, 5.856, 242.23 def . Thomas Carter, Chevy Monte Carlo, 6.556, 155.27 . Pro Stock -- John Montecalvo, Chevy Cobalt, 6.317, 221.27 def. Elijah Morton, Ford Mustang, 6.337, 218.87. Summit SuperSeries No Box -- Chad Dotson, Chevy Nova, 10.675, 113.99 def. Jean-Carlo Ras, Datsun B210, 12.105, 108.90. Summit SuperSeries Box -- Darrell Pittman, Chevy Camaro, 10.367, 125.46 def. Don Kiekel, dragster, 8.164, 160.04.
  4. Someone correct me if I am wrong this would be the same as using a turbo distributor (the one with the disc inside)???? as a trigger
  5. Easier said than done... most of the time they don't have it and when they do I better order it myself as the prices are about 4x more expensive I went to napa to get a voltage regulator for my 69 Plymouth and they told me it was $73 I found it to be too expensive and went to another parts store and guess what $16 that was 5 years ago I guess I can wait ... next month I'll be in Vegas
  6. Where I can buy fel pro head gasket and complete gaskets set for l28 We need the intake/exhaust gasket to finish the head Thanks
  7. A friend of mine runs 11's and 10's with nitrous on l28 stroker engine with fellpro gasket no problems another one built a backyard high compression engine kept blowing gaskets got a metal head gasket guess what broke the piston we've blown gaskets at 10 psi of boost due to detonation...
  8. probably you guys haven't visited www.turbomustangs.com lots and lots of carb blowthru setup and information some rides with 1000+ hp
  9. take a look at this car red datsun stroker engine runs 11 na and 10's with nitrous I don't think he spend 10 grand I got a few pics of the engine somewhere....
  10. for that kind of money you could 2 rb26 engines lol
  11. One thing I don't care about streetability this won't be a daily will be driven to the track and very limited street use the car isn't a z but a bluebird 2 door stripped that going to be painted flat black with weld rims mad max style Thanks for the suggestions.
  12. The only question I ask here in my post is regarding the cr I think the holset turbo I have is enough for that goal as well as the head... including the fuel pump and regulator that I have so even with forged pistons arp fasteners on rods, mains ,head and balanced bottom end it is unrealistic it was 400hp not 1400hp sure it can blow up everything is a possibility funny thing how a friend of mine can have near 300rwhp out of a bone stock 1.8l engine just by changing to microtech ems, ic , turbo etc... notice the brand of the ic btw he's in the 11's now http://www.dragtimes.com/Mitsubishi-Lancer-Timeslip-10722.html
  13. Since the F54 block I have has some grooves/ scratches in it the machine shop recommended to go OS 0.030 So I contacted brc pistons they told me to go 8.0 to 1 or 8.3 to 1 CR What is your opinion on cr regarding a turbo motor Since I spend allot of money into the head and now for pistons might as well shoot for 400hp I have shaved the head (p90) 0.005 just to be sure it is perfect and I also want to do it to the block... I do have an intercooler and I am going also with water/meth injection I also asked them for lighweight the pistons.... any opinions/ suggestions/ recomendations? Thanks
  14. Have you considered csu carbs? that's what most use with blowthru and having great succes with I am going blowthru also but with a homebuilt edelbrock I am going to use a holset hy35 turbo... hoping for 300+ hp when finished
×
×
  • Create New...