Chartoo

Hello Im trying to get a set of 17 inch wheels for my 2+2 but i need to know what the widest rims i can get that will clear stock suspension with a front aftermarket front spoiler. Normally i thought it was 7inch fronts and 8 inch rear wheels with a zero offset. Has anyone fitted bigger? I ask becasue the 2+2 is slightly wider in the arse than a 2+0. Cheers andrew

yeah talked to "thebrit" and they are custom vw fenders grafted on...too hard i will just stick to the zg's unless mircalulious my welding skills increase dramatically and i grow a patience gland cheers everyone

This is where i found them on EBAY but im not sure the pics matches up to the flares. Maybe the other pics will give some clues http://cgi.ebay.com.au/240z-flares-mould-in-type-look-really-hot-No-reserve_W0QQitemZ140258684029QQihZ004QQcategoryZ33654QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I found a pic of these cool flares and i really like them but im not sure on what they are. Are they blended in zg's or msa flares i thnk theyre called? Lastly where can i get them ? cheers Andrew

Hello, im doing some photo shopping and i need some good hi res pics of a 2+2. Somewhere north of 1mb. I need a direct side on photo, see example, and pref with good paint. i would use my own 2+2 but its in peices and has crap paint. Email to chartoo21@yahoo.com

Yeah! that would be great! i need a direct side on shot as im photoshoping the rear quarter windows thanks

That first repley is exactly what im looking for but im told by mate that it needs to be somewhere north of 1mb

Hi all im doing some photo shopping and i need some good hi res pics of a 2+2. I need a direct side on photo, see example, and pref with good paint. i would use my own 2+2 but its in peices and has crap paint. Email to chartoo21@yahoo.com Cheers

Thats good. Is there a way i can find out if they are designed to be front springs or rears. Are they different thicknesses or just different heights and spring rates?

I got a pair of lowered springs of a mate but he cant remember if they are front or rears. Is there a way to tell the difference or is there any difference? Cheers

yeah after thinking about it half and half might be the way

yeah im assuming there is -----------------a ground wire -----------------a low input-when light are on ----------------and a high input- when brakes are applies so i need to make circut between these and -----------------the postive -----------------and negative on the led array. This is far as my knowledge goes..............

yeah this is what im talking about exactly. Any ideas on where to find plans for the circuitry?

woops he he im a bit swear friendly in the shed

i just checked the video still working and this is how i wired up the indicators

is there a way to make all 40 go from dim to bright?

Hi all. Been busy working on my led taillight setup. Basically what i did was order a whole heap of those bright wide angle leds of the internet. Then i glued them into a pic of plastic and soldered them all up with a resistor on each led. Hey presto works great for my indicators (only on and off) but im not too sure how i will do this with my stop / tail lights as there is the on / tail and brake functions. How will this work with the resistors. Anyone done this before? Pics Video link to the first test

Hi all. Been busy working on my led taillight setup. Basically what i did was order a whole heap of those bright wide angle leds of the internet. Then i glued them into a pic of plastic and soldered them all up with a resistor on each led. Hey presto works great for my indicators (only on and off) but im not too sure how i will do this with my stop / tail lights as there is the on / tail and brake functions. How will this work with the resistors. Anyone done this before? Pics Video link to the first test

I'm definately going to remove the drip rails and then the 260z upside down windows but im just working out how long each window will be. Ive noticed that the length of the window and the roof hump are interacting together to influence the overall look and lines so ive got to get that right. Just a few extra inches are making a difference so to say ha ha Anyone know someone who is good at photoshop on the forum here?

yep come from good old perth in como

i tried the 240z pointed corner look but i just dont think the porportions are right. what do you think?

Hi all ive got a 260z 2+2 and ive removed the back seats. In its place im going to put the dividing interior from a z32 2 seater. The panels directly behind the seats that run into the center console. Ive measured and it fits to with in about an inch. However i'm chasing pics of the same interior bits from a 280zx and a z31 if the cars have them. chartoo21@yahoo.com cheers andrew

i just think the roof line of the 240z is more smooth and flowing than a the humped 260z version. i just wanna smooth it out a bit. the window will def help but i thought while im in that area cutting and welding i might just give it a nip and tuck

Hi all I've been looking at the hump on my 2+2 roof line and i was wondering if anyone has any info on how to get rid of it or reduce it. I would like a smoother line such as in the 240z. I've searched but couldnt find anything Ideas or links? Andrew

yeah im 90% gonna go with what i have done but i would just like to have a look at what can be done with the 240z ones. However it getting really hard to get them into aust. is there a photoshop section on hybridz? i cant seem to find it if there is