JB_BA

EDIT : T45 trans

Wanting to trade my 98 GT for a 240, 260, or 280z. (No zxs please. ) Car has fresh yellow paint with almost no dings, and not a scratch anywhere. Interior is black leather. Small tear in drivers seat pad on the left, which you actually can't see unless you know where to look because of where it is. All power options, and all work. Tinted windows. Ice cold A/C, heat works perfectly. T-5 trans. Put in new spark plugs last month, and the 4.6 runs like a top. New rear brake pads with freshly turned rotors. Front brakes sit at about 40%. Tires are about 7 - 8/32nds all the way around, Nitto 555s. CD and cassette. I actually just recently purchased this car, planning to turn it into a drag car, but I just can't shake the Z addiction. The car was hit out front at some point it appears, but it drives straight as an arrow, and is very clean. This car is stock, so it'll make a great daily driver or a build car. I can tell you that the right front lower ball joint could use a change, I actually have a pair that I was planning on installing. The exhaust was cut off post cat by the previous owner, so it sounds pretty mean. I was planning on going through the exhaust after the forged internals and PI head/cams/intake swap was finished. As it sits, this is a basically stock 98 Mustang GT with good tires and brakes, that's ready to roll. Oh, and the odometer is not currently working, but it's a mechanical one, so I'm sure it's an easy fix. I wasn't all that worried about it given my plans for it. The engine does not leak or burn any oil. The trans. has grinded 5th on me a couple times. Any questions feel free to ask. More than happy to get pics to anyone intrested. I would prefer a swapped car to trade for. Wouldn't mind a V8, or an L28T car. Wouldn't mine an RB car either. Thanks for looking, JB Would also take $4,000 cash. Firm.

Hey, any of you guys know a good site that sells rebuild kits for an '86 300zx automatic tranny? A buddy of mine is gonna rebuild for me, but I haven't found any auto parts, just manual. Or, if anyone here wants to make me a deal on a tranny I'd be intrested in that also...but I'm guessing shipping would be pretty expensive. Anyone? Any links? Thanks, JB

Over 10k for me...I've seen them go on here for alot less though. I'm looking for a daily driver too. I'd rather spend around 2.5 - 5k... Barrett

Ok...any turbo Z car. Show me picks, and tell me how much you're asking, and if it's negotiable. Post here, or email: phstightend@hotmail.com Nothing TOO pricey please. JB

I seem to be having some trouble with my clutch in my '93 MX-6. I was driving the other day, shifted from third on the way to fourth, and my clutch pedal went limp. I pulled it back up with my toe, and it had pressure again. The next day, I shifted from first to second, and there was a loud...I don't really know how to describe it..."pop whack thunk pop!" I replaced the slave cylinder. Then the master cylinder. When bleeding the clutch, the pressure builds up in the pedal great until the car is cranked, then it goes almost completly limp, and feels spongy towards the end of the stroke. It will build SOME pressure while the car is cranked, but I still haven't accomplished what I would call a good pedal. When I put the car into gear and hold the clutch pedal to the floor, then crank it, the car takes off...hence the clutch is obviously NOT disengaging. With the car cranked and not in gear, it will not go into any gear, except occasionally reverse. Usually, reverse just grinds as you try to put it in. The other gears just refuse to grind or anything, and my RPM drop. When attempting 4th, the car will occasionally SHUT OFF. The clutch is apparently still strong...the car will move even if you have the car in low gear with the e-brake pulled and try to start it. The ONLY thing I have left...is...MAYBE the clutch fork is broken or bent??? Maybe the clutch isn't EVER disengaging? Opinions/help PLEASE! Thanks, JB

Oh yeah, I'm sure if someone is intrested you're going to want some pics of this stuff. I can get those when I get back home. (I'm in AL right now.)Also, I'm willing to work with anyone who's intrested. The offer is negotiable. Barrett

Hey all, it's been a WHILE since I posted on here. I sold my Second Z to Mark in NC...which turned out to be crap I later found out. (I only replaced the motor in it, and took it to the track once before breaking a half-shaft.) Well, since selling that car, I had a beautiful Caddy pearl white 5.0 convertible Mustang GT (1990)...and then I sold that recently, as it just wasn't reasonable to drive around with the gas prices the way they are. Now I've got a 1993 MX-6, and I just can't take it...there is no aftermarket hope for this thing...some $800 seats and some pretty body kits...that's about it. The turbo swaps I hear about for it cost more than most engine/turbo swaps I've heard of. I know of one 13 second MX-6 where I live...and it couldn't have been cheap considering I'm sure he had to rebuild the trans-axle with performance goodies or get a high-performance one. Anyway...here's the deal. I want a Z. Something TURBO is a must. Either a zxt, or a late model with a turbo swap done. OR I'd consider a decent late model n/a. I have to offer: 1993 MX-6 (new slave and master cylinder) - Red, w/ white Ford Probe wheels NEW - Rockford Fosgate PUNCH 2400W Amp (Still in box) NEW - 2 Memphis HPO 10" subs in VT box AND $500 cash. Look, if someone doesn't work with me here...I'm going to end up with a sweet looking, mega bass, SLOW car. I don't want that. I want something fast and I'll live without the Bass...and the looks for now. I need something STREETABLE. P.S.> Wasn't sure where to post this. The site has changed a litle since I last posted. Later, JB

Ok... $850 SHIPPED. You save $400. C'mon, it's G-Force gears...for $850... Barrett

2.95 gears, rated at 600 HP and 575 ft/lbs...the guy on the phone said they've got guys making close to 900HP and haven't busted anything yet. They're the G-Force gears. Brand new, still in the box with the fluids...also got a steel bearing retainer with the gears. 28 spline input. http://www.g-forcetransmissions.com/tran_t-5_price.asp Paid $1240 for this set shipped. Will sell for $1000 OBO. email: phstightend@hotmail.com phone: 912-865-9534 Later, JB

OMG! Dude! I'd have givin' you a 5.0 ragtop, pearl white, 17 inch chrome cobra wheels, udp's, B303 cam, flowmaster exhaust, crane gold roller rockers...dude, I can't believe you let that go for a grand... I'M kicking myself... JB

Anyone have any idea what a 300zx is doing with "Rosenthal" badges on it? There's a Datsun badge, and next to it, a "Rosenthal" badge...it's on a '84...no...it's not a dealer tag... JB

Here's a REAL Camero. It's my buddy Kyle's. 383 Strocker (Crate)...they are about to tub it though (he and his dad) and that will be it for the freeway fun...but I'm thinking they'll be doing some damage at the race track soon. He's looking for 11's to start off with...previously running 12.9's...not bad for that big hunk of steel. In a way, I wish they'd leave the car the way it is though, it's been restored so much that the car actually looks like it was just driven off the show room floor in '81. (As you can probably see. Even the interior is perfect. The only thing different about it is the dash, which his dad custom fabbed and is no sporting a set of 5 inch and 3 and 1/4 inch guages, as well as new blinker signals and an emergency brake "engaged" light. Anyway, just thought a share. Pics: http://www.angelfire.com/pro/rkr/Z28.html The picture of the motor was taken before the stroker install... It's great to see the muscle spanking his mom's Z3. Oh, and I got a new gear set from Double D performance instead of a T-56 Tremec...I saved some money, and actually came out of the deal with stronger gears, and could keep the short throw shifter I already had...all in all I saved 1800 bucks and got a more durable tranny...and my short shifter...tremecs are a little notchy for me anyway... Later, JB

It's an '82, it's free...the body is in good shape, the interior isn't too great...more info later...I'll be picking it up within the next few weeks, and I'll post some pictures... BTW, the 350 Vega we're building is coming along good, I've got it gutted and the frame rails and floor pans are going in next, then we'll pull it in the shop and strengthen the drive train a little...we've already got a drive shaft we can shorten...then we'll drop in the 425 horsies and the saginaw 4 speed...then...we'll pray... Oh, my 5.0's Tremec (T-56) is on the way too! Can't wait...next I'll give it a shot of some of Powerdyne's supercharged pony magic...I think I'm going to start with the 9 psi version... JB

Thanks for that info. I'll use this to get started...oh and now I've got another project...a 1964 Impala...a friend wants me to restore it... JB