Jump to content
HybridZ

Mackay10

Members
  • Posts

    4
  • Joined

  • Last visited

Profile Information

  • Location
    Southern ca

Mackay10's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. 86-89 turbo ecu. Also looking for the chopper wheel as well
  2. L28et 280z. I have a crane cams hi 6 with ps92 coil. Do I still need the stock igniter(attached to stock coil?
  3. Thank you for the info. I also have a crane hi 6 with ps92 coil. Do I still need the stock igniter that is attached to the stock coil bracket or is that replaced by the hi 6 setup? Thanks again
  4. Yes I continue to research. The crank CAS plugged right in at the dizzy. Everything seems pretty straightforward except that resistor pack. Thank you for reply
  5. Hello, I'm partway through l28et 280z swap. 82 turbo l28. Purchased a supposed 81 turbo ecu&harness on zcar classifieds .The ecu numbers come up as a 1981.5 ecu however the harness has no dropping resistor pack connector. Only fuel pump modulator and ign harness connectors. can I used this ecu and run dropping resistors inline with the injectors or is there a better way? Thank you to anyone who responds with good advice. I have searched and found similar circumstances but not this exact ecu harness combo: zcar,atlanticz,hybrid,z home,z driver ect
  6. Are you looking for Subaru stub axles or Nissan r180 half shafts
×
×
  • Create New...