-
Posts
336 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by J240ZTurbo
-
-
Put a new sensor in car now stays on, but if I turned car off and try to turned it on again it wont start.
-
What are those specs can I please get those numbers????
-
I put a new walbro 255 fuel pump, can I keep the same old stock fuel pressure regulator, or do I need another kind so it wont get fouled?
-
Not sure yet. I will need to get a gauge first.
-
Put a new Walbro 255 on my 76 280z plugs are getting fouled not sure whats going on car wont start , do I need to change my stock fuel preasure regulator and put a fancy aeromotive one? Does anyone know why Im getting so much fuel into the plugs?
Thanks
J.
-
And why this is happening????
-
Yeah tooked #1 plug out and yes it was wet...whats the best way to take care of this?
-
Today car wont start, I got spark, fuel but it wont start any ideas whats wrong?
-
Today I discover the car shuts off after it gets fully warm, I removed the chts clean it up and same thing happends not sure whats going on here...
-
Anyone else knows whats wrong ?
-
Jacked my car up today thru the rear center under the rear diff, and both rubber rear strut insulator broke off please let me know if you have a set.
Thanks
J.
-
New fuel pump, new gas tank, new plugs, new cables, new cap and rotor, notice after it warms up it idles very rough, I spray some starting fluid thru the airflow meter and idles great for 3 seconds any ideas what could be wrong?
-
Still looking...
-
Internal pictures and top view.
-
More pictures please.
-
Still looking.
-
Ok got it..thank u all.
-
So the pump will stay on once the engine turnes on?
-
Been playing with a 76 few months ago, and I remebered hearing the fuel pump pre priming on the on bottom before the starting point for a few second, I was having issues with the car so I replace the old pump with a new walbro 255, not sure whats going on now, it only comes on at the starting point, I put a text light and I got no power it only comes on when I turned the key all the way, any ideas on what could be wrong please help.
Thanks
Juan.
-
Still looking..
-
Hi Larry; no they are not the same it wont fit..
-
Still looking...
-
You got pmd..
-
I got what you need
76 280z rough idle after warm up...
in Trouble Shooting / General Engine
Posted · Edited by J240ZTurbo
The white CHT sensor. So I tooked it for a drive around the block and it rides rough, some back firing, wont pick up speed, I moved the timing around and can clearly see the difference if I moved it around; but if I moved the TPS or if I unplug it I see no chages at all. It idles but I can not perfect.