COOP SNOOP
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by COOP SNOOP
-
-
Thanks for the suggestion. I have followed that write up and flipped the board and resoldered the 4 wires. All remains the same. All lights work except hi/lo. Any ideas?
-
Aloha everyone,
Looking for some suggestions on troubleshooting my headlights. I have the Dapper LED 7's. They worked great until very recently, the low beam and high beam would only work intermittently which was an issue pre-dapper. The tail lights, parking lights, turn signals, marker lights and all interior lights work great but the lo/hi have now ceased functioning. I have since following datsundave's videos and have completely cleaned the combo switch/turn signal. Much crisper now but still no hi/lo.
-No power to the two headlight fuses on the fuse block.
-Headlight fusible link is receiving 12v on both ends.
-When manually adding a separate external 12v source of power, the hi/lo work great.
-I have cleaned various connectors as related to the headlights on the wiring diagram.
Suggestions?
TIA
*edit; I have replaced all fuses according to FSM
1976 280Z Headlight Issues
in Ignition and Electrical
Posted
@NewZed
Still no power at fuse block on top 2 left fuses. The WR wire is getting 12v now which I dont think it did before but the solid R is not getting power which I believe is required for everything to work right?