Jump to content
HybridZ

DRFTEM

Members
  • Posts

    46
  • Joined

  • Last visited

About DRFTEM

  • Birthday 08/17/1982

Profile Information

  • Gender
    Male
  • Location
    San Diego, CA

Contact Methods

  • Yahoo
    howcroft2005

DRFTEM's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. I have a 74260z that has rusted floor pans and a pushed in rear quarter panel. but this car has alot of mods done to it. all the suspension work is done. even has fully adjustable coilovers modified to work. they are apexi n1 coilovers from a mazda miata. Im in southern california. Im only asking 2250 OBO.
  2. Hi I have a 1974 260z I can offer you. I am also located in SanDiego. This car has alot of mods done to it but doesnt have a perfect chasis. Has an l24 with what I have been told a small cam. has the 5 speed conversion. has a welded r180 to keep the power to the ground. it has techno toy tuning front traction rods and weld in camber plates. Has arizona z car quick steer knuckles. It has some sort of aftermarket front and rear sway bars. It has Apex'i N1 coilovers from a Miata retrofitted to work on the z. Has eagle rims sized 15x8 somewere around -30 offset. It has a full roll cage in it along with two sparco bucket seats and sparco harnesses. Battery located in hatch mounted in an Ammo container. Now the bad. the hood has some damage on the verry nose of it. It doesnot have the wiring to install the blinkers in the front. The right rear corner of the car is smashed in. The floor boards have rust. the passenger rear rocker panel has some rust. If interested let me know I can take some pictures or you can take a look at it when Im free. Im asking 4500 OBO
  3. DRFTEM

    Wtb Z car

    Hi I have a 1974 260z I can offer you. I am also located in SanDiego. This car has alot of mods done to it but doesnt have a perfect chasis. Has an l24 with what I have been told a small cam. has the 5 speed conversion. has a welded r180 to keep the power to the ground. it has techno toy tuning front traction rods and weld in camber plates. Has arizona z car quick steer knuckles. It has some sort of aftermarket front and rear sway bars. It has Apex'i N1 coilovers from a Miata retrofitted to work on the z. Has eagle rims sized 15x8 somewere around -30 offset. It has a full roll cage in it along with two sparco bucket seats and sparco harnesses. Battery located in hatch mounted in an Ammo container. Now the bad. the hood has some damage on the verry nose of it. It doesnot have the wiring to install the blinkers in the front. The right rear corner of the car is smashed in. The floor boards have rust. the passenger rear rocker panel has some rust. If interested let me know I can take some pictures or you can take a look at it when Im free. Im asking 4500 OBO
  4. Hi I have a 1974 260z I can offer you. I am also located in SanDiego. This car has alot of mods done to it but doesnt have a perfect chasis. Has an l24 with what I have been told a small cam. has the 5 speed conversion. has a welded r180 to keep the power to the ground. it has techno toy tuning front traction rods and weld in camber plates. Has arizona z car quick steer knuckles. It has some sort of aftermarket front and rear sway bars. It has Apex'i N1 coilovers from a Miata retrofitted to work on the z. Has eagle rims sized 15x8 somewere around -30 offset. It has a full roll cage in it along with two sparco bucket seats and sparco harnesses. Battery located in hatch mounted in an Ammo container. Now the bad. the hood has some damage on the verry nose of it. It doesnot have the wiring to install the blinkers in the front. The right rear corner of the car is smashed in. The floor boards have rust. the passenger rear rocker panel has some rust. If interested let me know I can take some pictures or you can take a look at it when Im free. Im asking 4500 OBO
  5. Hi I have a 1974 260z I can offer you. I am also located in SanDiego. This car has alot of mods done to it but doesnt have a perfect chasis. Has an l24 with what I have been told a small cam. has the 5 speed conversion. has a welded r180 to keep the power to the ground. it has techno toy tuning front traction rods and weld in camber plates. Has arizona z car quick steer knuckles. It has some sort of aftermarket front and rear sway bars. It has Apex'i N1 coilovers from a Miata retrofitted to work on the z. Has eagle rims sized 15x8 somewere around -30 offset. It has a full roll cage in it along with two sparco bucket seats and sparco harnesses. Battery located in hatch mounted in an Ammo container. Now the bad. the hood has some damage on the verry nose of it. It doesnot have the wiring to install the blinkers in the front. The right rear corner of the car is smashed in. The floor boards have rust. the passenger rear rocker panel has some rust. If interested let me know I can take some pictures or you can take a look at it when Im free. Im asking 4500 OBO
  6. Ok people after looking at the cost of these items new im looking to see if anyone has one that they know works but wouldnt mind parting with. I just recently upgraded my brakes and about 6 months ago replaced my brake master for an oe one for my 74z. well im realizing I think I want more feel from my brakes. so I am now looking for the booster and master cylinder from an 1980-1983 280zx.
  7. Thanks ass. I was hoping maybe someone local would help me out. And yes I did order them today. I actually just paid 300 for them to be here next day shipping.
  8. I was given some maxima flat brackets and then started to convert my car to disk and then it hit me oh ♥♥♥♥ I have the wrong brackets. So now my car sits with no brakes on te rears. So I am in desperate need of some modern motorsports rear disk brackets for using 240sx calipers. I am located in SanDiego. If someone has some on a track car if I could borrow them or buy them from you for the cost of buying new ones then you could go buy some new ones let me know I need these ASAP.
  9. I have a drive shaft from my 5 speed you can have for 50 plus shipping if youd like.
  10. I have one sitting in my bag that i too did the same. I changed mine out for it thinking it would fix my wiper problem turned out to be my linkage was siezed so I swapped back my stock one. Ill let you have it for 50 shipped also.
  11. If he doesnt buy it I will for sure
  12. Ok i am wondering if anyone makes and were i can get them the aftermarket tie rods with built in rack spacers for more turning radius and if anyone makes tie rod ends similar to the spl type for the 240sx that fix bump steer on lowered cars?
  13. ok. sounds like thats what I will have to do.
  14. Ok well I just changed out my thermostat and coolant yesterday. The lower thermostat housing had a coolant leak. So I removed it and re-sealed it.I then reconnected everything. I ran all the air bubbles out but now my gauge is reading that my car is hitting 250. So i freaked out thinking the thermostat must not be opening. So i pulled it back out and boiled some water. I then tested the water temp with a cooking thermometer and the thermostat opened. So I then ran the car untill it started reading it was overheating. I stuck the cooking thermometer into the radiator and it only read about 140 but the gauge was reading 250. What kind of resistence should I be getting through the sensor when at operating temp?Also what kind of voltage should i be getting through the single wire?
  15. DRFTEM

    ID My DIF?

    Ok people I pulled my dif out and replaced it with an open r180 so I can find out more about what was in my car. So I opened the case to see this. Then I tore it apart and found a 2 pinion clutch type dif. So I am now selling it for 250 If anyone is interested. It had a 3.9 ring gear also if anyone wants that also. It was in a case verry similar to my r180.
×
×
  • Create New...