dmanzo57
-
Posts
194 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by dmanzo57
-
I used a mustache bar from a 280Z, not a ZX. Don
-
I recently finished this swap on my '72 240z. The R200 mustache bar fits behind(towards the rear of the car) the 2 brackets that run vertically from the body to the lower control arm bracket. I had previously mounted my fuel pump to one of the vertical brackets. I had to move the pump when I installed the R200. There's a good picture of the rear suspension in the JTR manual that shows how the R200 is mounted. Don
-
The speedo gears for the 200-4R are available from a GM dealer. Check out TCI's tech info site... http://www.tciauto.com/tech_info/index.htm ...lots on good info on auto trans dimensions, gear ratios, speedo gears, etc. Don
-
Edelrock used to have the dimensions of most of their manifolds on the web. I can't find it now... I'm running a Performer RPM intake with a Performer RPM Q-jet carb(850 cfm). I use a Moroso drop-base air cleaner with a 3 inch filter. I,ve got the JTR mounts, including the spacer between the front crossmember and the frame, and everything fits well. Don
-
Thanks, Pete. I knew someone had to have figured this out the hard way already. Don
-
Can anyone tell me which radiator hoses will work with the '85 Camaro radiator and the JTR SBC engine mounts? I would prefer a molded hose over a flex hose. I am real anxious to fire up the engine after spending so much time and money piecing it together and installing it. Thanks, Don
-