-
Posts
38 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by AlexPie
-
-
nuff said.
-
agreed money is tight nowadays, it would have to be a steal rather than a deal.
Good luck with the sale! IF you sell.
on a side note I saw you're located in Syracuse
next time I'm up in that Area I'd love to see your Z
-
eyecandyzzz, All great looking Z's!
-
Very solid looking, good job!
I need something to replace all the ugly-ness behind the old datsun horn button that i removed.
-
white would be the easiest, because hit hides alot.
-
tickets to Australia are less that 1500 USD, I just needed a reason to go......
I think I found one
-
I think you need to go hotter on the last picture where your starting to get the flow of it
you don't want it to hump over so much you want good penetration and have your weld lay flatter
if that makes any sense, or alternatively you can slow down a bit which in turn will put more heat in
a general area, and also turn down the wire feed.
that just depends on which speed is more comfortable for you.
hopefully some of this makes sense
-
If its Uni-body I wouldn't even touch it.
-
Can you imagine the bill on that at a shop or dealer when it breaks!
yeah I said when, not if
-
A carbon fiber dash would be pretty sweet!
-
very cool blue!
good job
did you paint it yourself or
professionally done?
-
90 degree angle grinder and that 3M brillow type sanding pads is what I used for my hood
just make sure you have a huge air tank because you'll need it
-
I would just love to see this thing in person
Good luck with sale!
-
pinion bearing on your rear diff would be my guess
on my brother's Z has a pretty good vibration
that happens on both acceleration and deceleration
Anyone know if there is a crush sleeve on the pinion?
-
Why?, Because its never left me stranded
-
looks like a good start, Good luck.
-
tell me how they worked out since your the guy who out bid me
look under bid history Alexpiechowski you beat me by 1 dollar
-
what's your price range?
-
that's how I imagine my L block with a bunch of Japanese men running around making sure everything is in spec
-
I'll repeat myself...
even on start up?
I'll just keep being ignorant then.
-
anyone use BG MOA additive?
-
its just a hop, a jump and skip away! but I'm driving there so about an hour
if you could pm me with some info on the person you have in mind so i can get in touch with them,
that would be Awesome!
-
didnt vildini motorsport do this?
-
Did you get the motor out of a running car?
If so I say just run it.
These motors are surprisingly robust. I've only lost one at 20psi and it had 250k miles (possibly more).
It was a running according to the PO
but was torn apart by him and he ran out of money
for the build and that's when I bought it
I just want it all checked out to make sure its with in reasonable spec
and assembled.
Engine never comes up to temperature
in Miscellaneous Tech
Posted · Edited by AlexPie
mine does the same thing it warms up nicely
but once I go for a drive above 60 mph the temp drops
then when I slow down its back up to normal temps.