Search the Community
Showing results for tags 'roller'.
Found 2 results
-
From the album: adioz240's '72 240Z
January 2015 I had picked up my dream car that I will build and enjoy until the day I die. -
I'm rolling the last coat on tomorrow, but I took some pics yesterday and wanted to post them. Rustoleum Gloss White, rolling with high density foam brushes. Paint mix is a little thicker than the recommended 50/50 mix with mineral spirits. I just liked the paint going on a little thicker... Got lucky and have had more than a week of unseasonably warm weather, which I thought would help. Wetsanded every two coats - 800 grit, 1000, 1200, and I'm gonna do the last wetsand with 1200 before polishing. Car was originally metallic blue. Since I was going with a different color, I painted the door jambs with the roller and a foam brush. Also painted around the doors. My hood was almost junk when I started the project. It was on the car when I bought it, and originally came off of a 72. It had rust and bondo, both of which I think I cleaned up decently well. The bottom side of it looked awful. It was chipping from at least three repaints. So, before I started rolling on the white, I rolled the bottom side with POR15 to smooth out the surface. I think it came out pretty well. And keep in mind before I started the entire car was covered with a 2+mm thick sheet of dolphin glaze. I used a screwdriver and hammer to chisel off around the windshield. I'll do a build thread after I finish putting it back together. Til then, check it out. My welded-on gas filler
