Search the Community
Showing results for tags 'spacer'.
Found 2 results
-
Hey all, bought a pair of wheels with some positive offset, so I got a set of 25mm wheel spacers all around to make them fit. I went with the pair listed at zcardepot: https://zcardepot.com/wheel-spacer-set-pair-1.html I was hoping this would "ensure" that they fit all around (since zcardepot specializes in z-cars) but alas, the fronts do not. On the front (stock) hub, it seems that rubber-ish (might just be gunk lol) piece sticking out doesn't clear the center bore of the spacer. I need about 1/8" more clearance. See the following pics. Should I have expected this? Is there just gunk build-up on my car that needs to be cleaned off? What is this rubber extension anyway? Am I screwed unless I get new hubs? FYI - the wheels themselves have 73.1mm inner bore (~2 7/8") and would likely fit on the hub if they were correct offset. I have to use a hub ring to properly center them on the spacer outer edge. Gap when fitted: The center bore appears to be machined out to compensate, but it is just a bit too narrow: OEM wheel has 2 7/8" inner bore: Spacer has 2 5/8" inner bore: -
I am looking for the spacer that mounts between the brake master cylinder and the booster for a 280z. I think this piece is the same for just about all s30 vehicles. I seem to have misplaced mine and am hoping that someone has an extra laying around they don't need. Let me know if you need a picture to clarify what I'm talking about. If you have one you can part with for a reasonable amount please let me know. Thanks Alec
