Search the Community
Showing results for tags 't5 5 speed'.
Found 2 results
I was hoping someone could help me find an adjustable clutch fork pivot ball..I have a 1973 240z where I have installed an LT1 from a 1995 camaro and a Borg Warner World Class T5 from a 1992 camaro. The threads on the stock pivot ball in the picture is 22mm x2.5 as is the threaded bell housing. My local speed shop had nothing to help me. I purchased a 22mm x 2.5 die and had a friend attempt to thread a piece of mild steel round bar to fabricate one....but alas the die failed after just about a 1/2 inch of thread being cut. After searching online before and after this attempt I could only find one adjustable pivot ball that identified the threads for the bell housing.......it was 13/16-16...no help. I did purchase a threaded pivot ball stud that that is 1/2-13 which I will attempt to find and drill a m22-2.5 fully threaded bolt. There seems to be a lot more info on the Mustang T5's out there but I have been unable to piece all the info together. Any insight would be appreciated. Thanks in advance!