2s2mad Posted June 30, 2011 Share Posted June 30, 2011 Hi Guys, Here is my setup: Ported and polished N42 head with stage 1 Isky cam, on stock rebuilt block (1978 280Z) Stock injectors 240SX TPS MS2 V3 board (ExtraEFI), TunerStudioMS software v1.0004, FUEL Only. Aftermarket FPR: 42 PSI AEM Wideband gauge and bosch sensor. Custom inox header and complete exhaust (3 inches) The car is currently up and running (daily driver) I am using the VE Analyze Live to correct my Fuel VE Table in TunerStudio. Could I have your comments on my target AFR map. Are there any crazy things I should correct? My car is running pretty good once it reaches operating temp. I get some lean pops out of the exhaust when I decelerate but nothing too loud (afr between 13.5 and 14 when it pops) I am not using any TPS enrichment. Thanks for your time. Simon 2011-06-27_19.28.43.zip Quote Link to comment Share on other sites More sharing options...
Noddle Posted June 30, 2011 Share Posted June 30, 2011 This is mine, Intercooled L24 Turbo, EDIS, MS 2 Extra 310 , 3 inch exhaust, Nigel Quote Link to comment Share on other sites More sharing options...
Tennesseejed Posted July 5, 2011 Share Posted July 5, 2011 (edited) 2s2Mad, our AFR tables were very similar. My car is NA with a stage III cam. A couple of days ago I evened the table out some by lowering the cruise area from 14.7 to 14.0 and bumping up the the high rpm areas a bit. Best tune I have run to date. Edited July 5, 2011 by tennesseejed Quote Link to comment Share on other sites More sharing options...
s30red240z Posted July 5, 2011 Share Posted July 5, 2011 I have a 16x16 megatune N/A 160cc injectors, if you want it. L24E Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.