Jump to content
HybridZ

s30red240z

Members
  • Posts

    132
  • Joined

  • Last visited

Everything posted by s30red240z

  1. Yes will work, the only thing you have to do is change all connector plugs and clean it. megasquirt is very sensitive to electrical noise.
  2. If your zx is non turbo you could get nissan sentra E16 engine 4 cylinders distributor with DIYautotune 54mm 24-1-1 disc, and fits on your zx, easy.
  3. Seems everything is ok in your msq file
  4. Last week i called to dinosaur parts, and told me, this pistons are no longer available.
  5. Forged, yes are common 4 set, bore size 85, 85.5, 86, and 86.5, in the near future i gonna over bore L24 block to fit 85mm pistons
  6. I was thinking on new setup for my Z, this could be 4G63 1G +40 pistons on L24 rods+L28 crank, CR is about 7.2 with P90 head, pin diameter is 21mm float, and pin height 35mm What you think guys?
  7. If you locked your dizzy advanced, is not enough, the ignition box has timing curve itself, your engine must will have detonation problems, i was in the same problem with my car, for me was a little bit easy, because with megasquirt i fix it with the ignition table. The heat is the number one enemy of turbo engines, the best thing you can do, is buy an intercooler.
  8. Hi, i got a LT1 engine from 95 OBD2 camaro and, i would know, how can i remove the speed limiter, what kind of hardware and software i would need. Thanks!
  9. grounding the negative ignition coil wire, is very effective, and you can do it with a simple switch, if you don't have any MSD system, this works only for a single coil.
  10. Yesterday i did one of this adapters for a friend of mine, if somebody with CNC did you the flange, is easy to do with a weld machine.
  11. Shipping would be to El Paso TX. thanks!
  12. Yes, my friends, i am looking for a 1st generation 510 left front fender.
  13. Thanks, i think is a good number for break transmissions and R200 non LSD XD
  14. Yes i understand about this, my question is about how much WHP can achieve a stock L28 bottom end turbo or NA, because a friend of mine is afraid of destroy his engine with a hybrid HX40, i know if detonation is present at 200whp would destroy, but is we are carefull of detonation how much WHP will can reach on nearly safe mode.
  15. How your PW idle is? 1, mine is 1.9 with 450cc DSM on L24ET
  16. Therefore is you have ideal conditions, stock (pistons, crank and rods) will reach 700whp nearly safe?
  17. And what is the limit for a L28 stock bottom end? when tune is almost perfect.
  18. You can check with a square wave signal generator like this.
  19. +1, 80% of my search on google about nissan Z refers to hybridz
  20. Hi, is the AFM meter working or you don't know? i don't know what you mean
  21. Hi my friends, i am looking for Mass air flow, and ECU for 280z, working both, thanks!
  22. If the tires don't slip, big engines have a lot of torque
×
×
  • Create New...