Fuzzydicerule Posted January 30, 2012 Share Posted January 30, 2012 Hey guys. Simple question really. Is there anybody in Socal (North county san diego to be way more exact) Who has the time, knowledge and desire to help a brother out setting up a tune for an L28et. Its not of gigantic importance at the moment, as the car is lacking wiring, but sometime in the future im going to have to get this thing drivable, and i don't think i have the ability to get a decent tune going, at least not easily. not without any prior knowledge or experience. Is there anyone out there who would be willing to meet up once my car is running and give me a hand getting a decent tune set up? To be clear, ideally id go get it dynotuned somewhere, but i just flat don't have the cash for that, and TBH i think the money is better spent elsewhere at this point, and would like to just get her running good with a street tune, but it will happen down the line. (im willing to compensate for gas and such, if no one immediately local is availible, but along the same lines of the dynotune, i dont want to be paying out the rectum for it either, if everyone is going to try to extort me, then ill buckle down and do it myself) TBH im thoroughly expecting a TS migration, but on the off chance this hasn't been discussed and doesn't piss off the mods, I'm curious to see who's out there. (I have the car idling and revable, and the car is able to move under its own power, just cant go into boost) Quote Link to comment Share on other sites More sharing options...
dexter72 Posted January 30, 2012 Share Posted January 30, 2012 Have you tried copying a tune based off of your setup, in the Maps Section?. Just look for one thats similar to your setup and copy it. See how the engine runs with that tune and then you have to tune your engine from there. Thats what a lot of people do. Do you have a wideband? If not its harder to tune but not impossible. Just have someone ride with you and you tune on the fly. Megasquirt also has a program that helpe you tune your engine. Quote Link to comment Share on other sites More sharing options...
Fuzzydicerule Posted January 30, 2012 Author Share Posted January 30, 2012 I did find one, but I've had to fiddle with it a lot just to get it To run the way it does now Yes I have a wideband. The reason I like someone to help ou is that there are a lot of parameters that I am unsure of and I have a sneaking suspicion that this entire process would e easier with someone who knows what they're doing Quote Link to comment Share on other sites More sharing options...
jthom5147 Posted January 30, 2012 Share Posted January 30, 2012 School started for me, and so I lack the time to do my wiring and tuning myself. I'm taking the car to a shop in oceanside/Vista to have it done... The shop has done MS work before, so ill let you know the results when I get the car back. Quote Link to comment Share on other sites More sharing options...
kaito Posted January 31, 2012 Share Posted January 31, 2012 I might be willing to take a look. Im no guru though. What code are you running? Is everything stock? What wiring still needs to be done? You got any 280z interior pieces? let me know. Quote Link to comment Share on other sites More sharing options...
Fuzzydicerule Posted January 31, 2012 Author Share Posted January 31, 2012 Not sure on the specifics as its been a month r so since ive done anything with it. The board is an msII v3.0. The motor is an l28et stock longblock, t3/t4 with a 14psi wg, ka24 tb and supra 440 injectors. The exu wiring is done I just need to fix a few things, the cars wiring is out and due to be replaced any day now Quote Link to comment Share on other sites More sharing options...
kaito Posted January 31, 2012 Share Posted January 31, 2012 Ok let me know if you want to meet up. Quote Link to comment Share on other sites More sharing options...
Fuzzydicerule Posted January 31, 2012 Author Share Posted January 31, 2012 Will do man, where are you located Quote Link to comment Share on other sites More sharing options...
kaito Posted February 1, 2012 Share Posted February 1, 2012 Chula vista, not too far from north county. What area of north county you located? Quote Link to comment Share on other sites More sharing options...
Fuzzydicerule Posted February 2, 2012 Author Share Posted February 2, 2012 Carmel valley, west end of the 56 off te 5 Quote Link to comment Share on other sites More sharing options...
kaito Posted February 3, 2012 Share Posted February 3, 2012 Up by clairemont mesa then. You should drop by the z club meeting. Its a bunch of old guys but I still like it. The next meeting is at 7pm on Tuesday. Fisrt Tuesday of every month. Quote Link to comment Share on other sites More sharing options...
Fuzzydicerule Posted February 3, 2012 Author Share Posted February 3, 2012 Farther north but that's the gist of it yeah. Where do they meet? Quote Link to comment Share on other sites More sharing options...
kaito Posted February 3, 2012 Share Posted February 3, 2012 DENNY'S Restaurant. Located at 4280 CLAIRMONT MESA BLVD SAN DIEGO,CA 92117, in the Clairmont Square. zcsd.org Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.