2eighTZ4me Posted February 8, 2012 Share Posted February 8, 2012 (edited) For a 240SX tranny swap. Driveshaft is 50mm shorter than the later 240 shaft. Measures 23 3/4" from the shoulder to shoulder of each U joint....not center to center of the Ujoint, but from the top of the holder ring. Can provide a drawing if unsure. Thanks! Edited February 8, 2012 by 2eighTZ4me Quote Link to comment Share on other sites More sharing options...
Blue Posted February 8, 2012 Share Posted February 8, 2012 (edited) I believe i have one that i pulled out of my 71 a year ago for an r200 swap, let me check my storage Pm me Thankyou Edited February 8, 2012 by Blue Quote Link to comment Share on other sites More sharing options...
roger280zx Posted February 8, 2012 Share Posted February 8, 2012 Let me dig into my parts pile and see if I still have that one. I know I did at one time, call me tomorrow to remind me. Quote Link to comment Share on other sites More sharing options...
makinit76 Posted February 8, 2012 Share Posted February 8, 2012 if you don't come up with one let me know I have a 71 parts car with the drive line still intact. Quote Link to comment Share on other sites More sharing options...
280Z-75 Posted February 12, 2012 Share Posted February 12, 2012 For a 240SX tranny swap. Driveshaft is 50mm shorter than the later 240 shaft. Measures 23 3/4" from the shoulder to shoulder of each U joint....not center to center of the Ujoint, but from the top of the holder ring. Can provide a drawing if unsure. Thanks! http://sfbay.craigslist.org/sby/pts/2825822149.html This guy in san jose is selling his 71 driveshaft. Not sure if it fits your description but you can verify with him. I bought it for $30, and he took a return when the flange didn't fit on my R200. Very nice guy, i think it measured somewhere along the lines of 28-29 inches in total length. Quote Link to comment Share on other sites More sharing options...
2eighTZ4me Posted February 12, 2012 Author Share Posted February 12, 2012 Thank you 280Z-75. I shot him an e-mail. If he won't ship - I still need one folks - NASA race on Mar. 9th and I need a backup - help a brotha out! Quote Link to comment Share on other sites More sharing options...
2eighTZ4me Posted February 21, 2012 Author Share Posted February 21, 2012 Bump - somebody? Anybody? You'd think these things were made of unobtainium! Thanks all! Quote Link to comment Share on other sites More sharing options...
2eighTZ4me Posted February 23, 2012 Author Share Posted February 23, 2012 I've not come up with anything yet. What do you want for yours? I made a mistake in the ad - the measurement should be +/- 28" from tip to tip. Yokes included. Quote Link to comment Share on other sites More sharing options...
2eighTZ4me Posted February 23, 2012 Author Share Posted February 23, 2012 All - my mistake. The shaft should measure +/- 28" from tip to tip of the whole shaft. Yokes included. The latter shaft will be around 29 3/4" from tip to tip. I need the shorter 28" one. My bad - and another thanks to Nigel's post on Motortopia about the 240SX swap. Quote Link to comment Share on other sites More sharing options...
Blue Posted February 25, 2012 Share Posted February 25, 2012 (edited) All - my mistake. The shaft should measure +/- 28" from tip to tip of the whole shaft. Yokes included. The latter shaft will be around 29 3/4" from tip to tip. I need the shorter 28" one. My bad - and another thanks to Nigel's post on Motortopia about the 240SX swap. I have the early 71 driveshaft in my hot hands! ... measured roughly 28".... confirmed ... sent you a pm with pictures Regards, Blue Edited February 25, 2012 by Blue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.