David GArcia Posted February 29, 2012 Share Posted February 29, 2012 I was wondering if therw is a seal i meed to use when i bolt up the brake master cylinder to the brake booster? Quote Link to comment Share on other sites More sharing options...
Miles Posted February 29, 2012 Share Posted February 29, 2012 Yes, there is a gasket. You can buy gasket material from a parts store. Use the flange of the MC as a template to outline the gasket and then cut it out with a razor. I use a piece of tubing as a punch to cut out the bolt holes. Sharpen the end of the tubing with a file. Place the gasket on a hard surface and then punch out the bolt holes. Quote Link to comment Share on other sites More sharing options...
David GArcia Posted March 1, 2012 Author Share Posted March 1, 2012 Thank you for the information. When i purchased my z the booster and master cylinder did not have a gasket in between. After a while my master cylinder broke and leaked the brake fluid into the booster. Then they both went out and now I have to replace both. It gives me a good oportunity to upgrade to the 280zx brake master cylinder. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.