Gareth. J. Posted June 8, 2012 Share Posted June 8, 2012 Hey Guys, After fitting the RTZ diff mount with urethane bush I have noticed a clearance problem. With the car on stands, the suspension at full droop.... the sway bar is touching the diff pinion to prop shaft flange this wasn't happening with the ols solid mount. BTW it's a standard sway bar facing backwards. Will this be an issue? I do have a fair bit of pitch on track under heavy breaking and initial turn in. How do others with RTZ diff mount go? Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted June 8, 2012 Share Posted June 8, 2012 Good old domino effect. Can you move it down a little with a spacer and longer bolts? Had to do that with my front sway bar after I lowered the car. Quote Link to comment Share on other sites More sharing options...
JMortensen Posted June 8, 2012 Share Posted June 8, 2012 The mounts are welded into the frame, so I don't think that is an option unless they were cut off and new mounts welded on. Could switch to a rear mounted bar. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.