evildky Posted January 14, 2003 Share Posted January 14, 2003 ok so I know there are 2 types of the r200 one is 2.0 and the other 2.25 but where is this measurement coming from, I measured the diameter of my pinion and it is like 1.0 what do I need to look at to see if mine will work ? Quote Link to comment Share on other sites More sharing options...
fl327 Posted January 14, 2003 Share Posted January 14, 2003 i think you have to measure diagonally. Quote Link to comment Share on other sites More sharing options...
evildky Posted January 14, 2003 Author Share Posted January 14, 2003 diagonally on what ? the flange face ? the bolt holes ? what and where exactly am I meansuring ? Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted January 14, 2003 Share Posted January 14, 2003 Unbolt your drive shaft and measure across the round slight male protrusion in the center of the flange the ujoint is connected to. This is the male part of the pilot flange that centers to the female pilot flange that is connected on the differential pinion.... better yet buy a 2-2-899-1 diff adapter and if does not bolt up to the diff pinion flange ..ya got a 2.00 and then find one the flange adapter fits and I will guarantee it to be a 2.25 inch pilot diameter. I never measured mine just slapped the Neapco 2-2-899-1 adapter flange on the differential pinion flange and clearly saw daylight in all 4 mounting holes with a flush fit. Get the adapter flange cuz you will need it sooner or later. Quote Link to comment Share on other sites More sharing options...
evildky Posted January 15, 2003 Author Share Posted January 15, 2003 thanks for the info tomahawk, thats what I needed to know, and yeah I ordered the part already should be in this week, good price to only $27+tax Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted January 15, 2003 Share Posted January 15, 2003 Great price for $27.00 Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted January 15, 2003 Share Posted January 15, 2003 Hey Evildave, where did you order your pinion flange from? I will also be needing one. Quote Link to comment Share on other sites More sharing options...
evildky Posted January 16, 2003 Author Share Posted January 16, 2003 can't remember the name of the shop just a local shop specializing in yokes, was actually referred by a local 4 wheel shop, I can not tremember name right now but when I pick it up I will post the name and phone number if you like Quote Link to comment Share on other sites More sharing options...
evildky Posted January 17, 2003 Author Share Posted January 17, 2003 not as cheap as I thought, the guy that priced me on the phone was not there, I think he quoted me the dealer price ? anyhow it brok down like this: N2-2-899-1 29.96 Tax 1.80 Freight charge 5.05 Total 36.81 not what I was expecting, but I am guesing freight would be about the same to your door, if this is better than you have found local the name of the shop is Republic Diesel and they can be reached at 1-800-292-5565 they are located here in Louisville, KY by the way the part fits so I have the right pinion flange Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.