TieFighter88 Posted September 24, 2012 Share Posted September 24, 2012 What is the correct/healthy range in oil pressure that my L28E should be within? I have never seen it exceed 75psi. Where should it be, say: during cold or hot idle, under load doing burnouts in the parking lot? I apologize if this has already been answered , or is common/basic knowledge... I did search and some reading prior to the forum... 1978 280z with 280zx L28E N/A Quote Link to comment Share on other sites More sharing options...
OldAndyAndTheSea Posted September 24, 2012 Share Posted September 24, 2012 Common rule of thumb with l28s is somewhere around 10lbs at an idle once warm, and 10 psi per 1000 rpms until around 50 psi. These readings differ slightly from motor to motor. Also changes depending on what oil pump/ viscosity oil you are using. This is a very general overview. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.