mattb3562 Posted November 14, 2012 Share Posted November 14, 2012 I'm looking for an apater to bolt a t3/t4 up to the stock zx manifold. I've looked on ebay and found several but it looks like there are a couple different flanges that coupled the t3 to different makes, so I was wanting one that fit our cars, obviously. lol The flange on my compressor housing is bolt hole, center to center 3" x 1 1/8". Thanks fellas Quote Link to comment Share on other sites More sharing options...
ozzzzz Posted November 15, 2012 Share Posted November 15, 2012 What t4 turbo do you have? Quote Link to comment Share on other sites More sharing options...
mattb3562 Posted November 15, 2012 Author Share Posted November 15, 2012 I just got it in the mail today and what was listed as a t3/t4 hybrid turned out to be a ball bearing t28. Errr...lol. it's a nice piece but not what I needed. So, now I'm hoping to trade it for a t3/t4 or a nice t3 and downpipe. Quote Link to comment Share on other sites More sharing options...
ozzzzz Posted November 15, 2012 Share Posted November 15, 2012 The stock manifold is a t3. The t3/t4 hybrids should bolt up to the manifold without an adaptor. I guess I missunderstood what you were looking for. I have a t4 turbo and had to use an adaptor . Make sure the turbo you get has a internal wastegate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.