Snailed Posted January 8, 2013 Share Posted January 8, 2013 So our Target special dish rack drain pan has been dumping water all over the counter for too long. I decided to make a simple stainless one that will actually guide the water into the sink. I made it from .065" 304ss with one polished side. The beads for drainage were just done on a roller and I finished the ends with a punch I made. The legs are just welded along the top edges and I polished turned up sides and welds on a 10" buffing wheel. Quote Link to comment Share on other sites More sharing options...
LanceVance Posted January 9, 2013 Share Posted January 9, 2013 So... Group buy? I think my wife would be more forgiving of my car hobby if I could fab up stuff like this for her! Quote Link to comment Share on other sites More sharing options...
Trevor Posted January 9, 2013 Share Posted January 9, 2013 While I'm at it syndrome: Now polish the sink to match.... Quote Link to comment Share on other sites More sharing options...
johnc Posted January 9, 2013 Share Posted January 9, 2013 Crate & Barrel would charge $60 for that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.