Ben's Z Posted March 11, 2013 Share Posted March 11, 2013 (edited) I bought an IC from just intercoolers on ebay, only to have one of my mounting tabs be defective. I think they are going to take care of me, and I actually might buy a little longer IC. Overall it was 25.5". It would work but.... Is anyone running an IC 27.5" total length? Because I was thinking some 90 degree silicon elbows might just be perfect for going through the cold air holes in the rad support if I get the longer IC. Edited March 11, 2013 by Ben's Z Quote Link to comment Share on other sites More sharing options...
ryan95i4 Posted March 11, 2013 Share Posted March 11, 2013 Mine is 27" total length, and i have 90* elbows passing through the radiator support to attach. I bought 90* silicone elbows with long legs and then trimmed to the size I needed. Quote Link to comment Share on other sites More sharing options...
Ben's Z Posted March 11, 2013 Author Share Posted March 11, 2013 Mine is 27" total length, and i have 90* elbows passing through the radiator support to attach. I bought 90* silicone elbows with long legs and then trimmed to the size I needed. Looks like you are running larger than 2" on your IC pipe. A quick search on ebay yielded no 2" ID long leg elbows. Did you buy them somewhere else? Quote Link to comment Share on other sites More sharing options...
Ben's Z Posted March 11, 2013 Author Share Posted March 11, 2013 I don't have any 90's around me to measure. I guess what is the leg length of the inside corner on a standard length leg 2" silicon 90 degree elbow? Quote Link to comment Share on other sites More sharing options...
OhBilly Posted March 11, 2013 Share Posted March 11, 2013 If you call these guys up they might be able to make you some (or have some) with longer leg lengths: http://www.siliconeintakes.com Most all of their listed products have associated dimensions so you should be able to find the information you need. Good luck. Quote Link to comment Share on other sites More sharing options...
ryan95i4 Posted March 12, 2013 Share Posted March 12, 2013 Looks like you are running larger than 2" on your IC pipe. A quick search on ebay yielded no 2" ID long leg elbows. Did you buy them somewhere else? I have 2.5" piping, i bought the elbows from http://stores.ebay.com/automodsllc this was the second link after a google search: http://www.verociousmotorsports.com/Shop-by-Brand/venair-silicone-bends/Venair-90-Degree-Silicone-Bend-12-Arms there were others as well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.