HE SAL Posted April 15, 2013 Share Posted April 15, 2013 Has anyone had problems fitting a Arizona ZCar Pressure Plate to a 225mm Flywheel. I was told by Dave that this plate would work with either the 225mm or 240mm Flywheel but in reality it does not. He is adamant that it will fit and as anyone who has had dealings with him in the past knows, he is thick headed and will not be convinced otherwise. Thanks, Howard. Quote Link to comment Share on other sites More sharing options...
NewZed Posted April 15, 2013 Share Posted April 15, 2013 Did you try the other two orientations? They only fit one way although they look like they'll fit three ways. Spin it. Quote Link to comment Share on other sites More sharing options...
HE SAL Posted April 15, 2013 Author Share Posted April 15, 2013 Yeah...... Spent 30 minutes trying all possible orientations on 3 different 225 Flywheels but nothing works...... I am out of options Howard. Quote Link to comment Share on other sites More sharing options...
NewZed Posted April 15, 2013 Share Posted April 15, 2013 Tight dowel hole maybe? Or are the holes definitely in the wrong spots? Quote Link to comment Share on other sites More sharing options...
HE SAL Posted April 15, 2013 Author Share Posted April 15, 2013 If the Dowels were tight I would be ecstatic...... I could easily drill them out but no........ bolt holes are off in all orientations, not only that but Pressure Plate overhangs the Flywheel which according to Dave is not a problem. I don't know about that........ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.