HaloZ Posted October 14, 2013 Share Posted October 14, 2013 (edited) I basicly have a bare L28 long block that I am planning to drop in a 71 240ZI have the driver the driver side motor mount, crankpulley/balancer, and the distributor, and that's about it.so I need:pass side mount,oil filter stud,Alternator and bracket, thermostate houseing mech fuel pump, not needed, turns out car has low pressure fuel pump. carbs and runners, linkage, fuel pump block off plate, water pump pulley I'm pretty new to the S30s but not new to Nissan, I have owned 4 Z32s over the last 14 years. If any one has a blown engine and would like to sell me these parts, or know someone that does, please, let me know.Email is quickest and eaisest, Ricq.HZ@gmail.com Thanks.as you can see I am needing quite a bit..HZP_0004 by Ric Quintanilla, on Flickr HZP_0005 by Ric Quintanilla, on Flickr Edited October 17, 2013 by HaloZ Quote Link to comment Share on other sites More sharing options...
Heroez Posted October 15, 2013 Share Posted October 15, 2013 I have some good carbs with intake manifolds and air cleaner housing. It was unbolted at the head. I also have a fuel rail. Take all that for $200 olus whatever shipping. Quote Link to comment Share on other sites More sharing options...
HowlerMonkey Posted October 15, 2013 Share Posted October 15, 2013 If your L28 has a p79 head, a mechanical fuel pump is out of the equation. Strangely, the P90 turbo heads bring back the mounting boss hole. Quote Link to comment Share on other sites More sharing options...
HaloZ Posted October 15, 2013 Author Share Posted October 15, 2013 Ahh thanks for the info. I have a E88 head and a N42 Block.So I think the mech fuel pump will work from what I have been told, but will need the cam gear for it.I was caught up in some garage clean up last night and work this morning, just got home a eating dinner.Thank you for all the messages and emails! I'm sorting and returning them now. Quote Link to comment Share on other sites More sharing options...
zentech Posted October 16, 2013 Share Posted October 16, 2013 Ahh thanks for the info. I have a E88 head and a N42 Block. So I think the mech fuel pump will work from what I have been told, but will need the cam gear for it. I was caught up in some garage clean up last night and work this morning, just got home a eating dinner. Thank you for all the messages and emails! I'm sorting and returning them now. i have that offset pulley to run your fuel pump and a few other pieces you need. Quote Link to comment Share on other sites More sharing options...
az240z Posted October 16, 2013 Share Posted October 16, 2013 I ave several mech fuel pumps. 17.50 + shipping. Quote Link to comment Share on other sites More sharing options...
HaloZ Posted October 17, 2013 Author Share Posted October 17, 2013 turns out I have a low pressure fuel pump mounted right off the tank.I was able to pick up a oil filter stud, but I'm also wondering if I should get an Oil filter tree from a 280zx?!?not so much for an oil cooler, but just ease of filter R+R and cleanlyness. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.