69sroadster Posted October 20, 2013 Share Posted October 20, 2013 So first I searched the forums, then I downloaded the manual and read it over, now I'm asking before I tear into it if there are any tips for taking the 350z 6 speed apart just to the point of having the front and rear covers off. The only things I've seen so far are to replace 4 of the one time use bolts on the front side and replace the front and rear seals. I'm guessing these 4 bolts don't stretch again properly after their removal. Any thing else to watch out for? The purpose of this is to take the front cover to get the front of it milled down by a shop for the adapter plate to SR20...it is a lot easier to handle/ship etc in this form and most shops don't want to deal with it in its normal state. Quote Link to comment Share on other sites More sharing options...
tooquick260 Posted October 20, 2013 Share Posted October 20, 2013 Contact Znke,,,, he is a wiz a transmissions!! Did my S15 6 speed conversion to L26 motor. Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted October 21, 2013 Share Posted October 21, 2013 Contact Znke,,,, he is a wiz a transmissions!! Did my S15 6 speed conversion to L26 motor. Can't find Znke in member search. Did I mess up? Quote Link to comment Share on other sites More sharing options...
tooquick260 Posted October 21, 2013 Share Posted October 21, 2013 My bad "Xnke" is his name. Quote Link to comment Share on other sites More sharing options...
69sroadster Posted October 22, 2013 Author Share Posted October 22, 2013 Thanks tooquick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.