sid240z Posted November 4, 2013 Share Posted November 4, 2013 Hey guys so I finally decided into dropping in a ka24de into my z for the sole purpose of it being a track car. I know the 510 guys put ka in there's cars all the time, an I've googled, check on ratsun and other forms and can't find how a decent write up on how to wire it. I know you can wire it to run on just two wires but how? Quote Link to comment Share on other sites More sharing options...
mjd240z Posted November 21, 2013 Share Posted November 21, 2013 Good luck, I'm doing research as well. Let me know if you find something or figure it out, and I'll do the same. I do believe there's a small write up on ratsun titled somewhere along the lines of "Wire SR/CA/KA into anything" and it looked like a circuit board with relays power and ground. I even think there's a video on it. Other than that I wouldn't know where to buy it. I was thinking of doing the swap mounting the engine and everything else then tow it to a professional shop and have them wire it up independently. Quote Link to comment Share on other sites More sharing options...
mjd240z Posted November 21, 2013 Share Posted November 21, 2013 Found it!!!! Wiring Specialties. check out their website. loosk promising. Quote Link to comment Share on other sites More sharing options...
sid240z Posted April 16, 2014 Author Share Posted April 16, 2014 Just finished looking threw wiring specialties website and cant really find anything useful :/ Quote Link to comment Share on other sites More sharing options...
sid240z Posted April 16, 2014 Author Share Posted April 16, 2014 I was thinking of trying to wire it to run off of the stock alternators wires just cut the stocks pigtail off and replacing it with the ka's Quote Link to comment Share on other sites More sharing options...
sid240z Posted April 16, 2014 Author Share Posted April 16, 2014 Lol almodt forgot google how to swap a ka24de in to a nissan s12 i found how to run the engine only problem now is the alternator Quote Link to comment Share on other sites More sharing options...
sid240z Posted April 16, 2014 Author Share Posted April 16, 2014 Wire #1 to key switch acc/on and wire #17 to a constant 12v and thats it Heres a link http://club-s12.org/retro4/index.php?topic=22919.0 Quote Link to comment Share on other sites More sharing options...
logr Posted April 16, 2014 Share Posted April 16, 2014 The alt. just needs 12v. You can wire the larger of the 2 wires in the snap in plug to the main feed wire on the alt. The other wire(in the snap in plug) is for the light and abs. Quote Link to comment Share on other sites More sharing options...
sid240z Posted April 25, 2014 Author Share Posted April 25, 2014 I was just looking at that and the wires that plug in to the Ka Alternator are both the same size one is white/red and the other is yellow. How do I know which one to connect? Also I connected the large white wire and black wire (power and ground Im guessing) from the stock Z alt. wires to the Ka alt. I guessing that would work just need to know which plug-in wire to use. I'd also like to say sorry about being retarded when it comes to electrical things Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.